Chapter 3. Explore Your Computer; Manage Power; Check The Battery Status; Charge The Battery - Lenovo 82FN004YIX User Manual

Table of Contents

Advertisement

Chapter 3. Explore your computer

Manage power

Use the information in this section to achieve the best balance between performance and power efficiency.

Check the battery status

The battery status icon
the current power plan, and access battery settings quickly.
Click the battery status icon to display the percentage of battery power remaining and change the power
mode. A warning message is displayed when the battery is low.

Charge the battery

When the remaining battery power is low, charge your battery by connecting your computer to ac power.
The battery is fully charged in about two to four hours. The actual charging time depends on the battery
capacity, the physical environment, and whether you are using the computer.
Battery charging is also affected by its temperature. The recommended temperature range for charging the
battery is between 10°C (50°F) and 35°C (95°F).
Note:
To maximize the life of the battery, once the battery is fully charged, it must discharge to 94% or lower
before it will be allowed to recharge again.
To extend your battery's lifespan, the battery may optimize its full charge capacity based on your usage.
After prolonged periods of limited use, full battery capacity may not be available until you discharge to as
low as 20% and recharge completely. For more information, refer to the power section of Lenovo
Vantage.

Check the battery temperature

You can check the battery temperature in Lenovo Vantage or Lenovo PC manager.
Step 1.
Open Lenovo Vantage.
Click Hardware Settings ➙ Power.
Step 2.
Step 3.
Locate the Power Status section and then click Show Details to view the battery temperature.
Note: If you're using Lenovo PC Manager, select System hardware ➙ Battery.

Set power button behavior

By default, pressing the power button puts the computer to sleep mode. However, you can change the
power button behavior in Windows Control Panel.
Step 1.
Right-click the battery status icon in the Windows notification area.
Select Power Options ➙ Choose what the power button does.
Step 2.
© Copyright Lenovo 2020
or
is in the Windows notification area. You can check the battery status, view
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yoga 6

Table of Contents