Audio Settings - Pioneer AVH-2400NEX Operation Manual

Menu Item
(off )
*1 Refer to Still image source (page 58).
*2 You can preview the top menu screen or the AV operation screen by touching [Home] or [AV]
respectively.

Audio settings

The menu items vary according to the source. Some of the menu items become
unavailable when the volume is set to mute.
Menu Item
[Graphic EQ]
[Super Bass] [Powerful]
[Natural] [Vocal] [Flat]
[Custom1] [Custom2]
[Fader/Balance]
[Mute Level]
[ATT]
[Mute]
Description
Hides the clock display.
Description
Select or customize the equalizer curve.
Select a curve that you want to use as the basis of
customizing then touch the frequency that you want to
adjust.
TIPS
• If you make adjustments when a curve [Super Bass], [Powerful],
[Natural], [Vocal], or [Flat] is selected, the equalizer curve settings
will be changed to [Custom1] mandatorily.
• If you make adjustments when the [Custom2] curve is selected
for example, the [Custom2] curve will be updated.
• [Custom1] and [Custom2] curves can be created common to all
sources.
• If you trail a finger across the bars of multiple equalizer bands,
the equalizer curve settings will be set to the value of the
touched point on each bar.
Touch or to adjust the front/rear speaker balance.
Set [Front] and [Rear] to [0] when using a dual speaker
system.
Touch or to adjust the left/right speaker balance.
TIP
You can also set the value by dragging the point on the displayed
table.
NOTE
Only the balance can be adjusted when [Network Mode] is
selected as the speaker mode.
Select mute or attenuate the AV source volume and iPhone
or smartphone application volume when the navigation
outputs the guidance voice.
The volume becomes 20 dB lower than the current volume.
The volume becomes 0.
- 96 -