Table of Contents
Advertisement
_...
Connecting to a TV or VCR
Playback on a TV Screen
(C[3 12)
Before connecting the camcorder, select
the [TV TYPE] setting according to the TV
set to which you will connect the
camcorder - [WIDE TV]: TV sets with 16:9
aspect ratio or [NORMAL TV]: TV sets
with 4:3 aspect ratio ([I3 41).
Connecting
Connect the camcorder to the TV
following the connection diagram shown
in the previous section Connection
Diagrams (Ci3 64).
Playback
1
Turn on the camcorder
and the
connected TV or VCR.
On a TV: Select as the video input the
same terminal to which you connected
the camcorder.
On a VCR: Set the
input selector to the external video
input (usually labeled LINE IN).
2
start the playback of the movies
(_
32) or still images (El3 33).
Recording to a VCR or Digital Video
Recorder
You can copy your recordings by
connecting the camcorder to a VCR or a
digital video device.
([Z] 12)
Connecting
Connect the camcorder to the VCR
following the connection diagram shown
in the previous section Connection
Diagrams (CJ364).
Recording
1
Connected
device: Load a blank
cassette or disc and set the device
to record pause mode.
2
This camcorder:
Locate the scene
you wish to copy and pause
playback shortly before the scene.
3 This camcorder:
Resume the movie
playback,
4
Connected
device: Begin recording
when the scene you wish to copy
appears. Stop recording when
copying is complete,
5 This camcorder:
Stop playback.
II
• Turn off all the devices before starling the
connections.
• Sound from the built-in speaker will be muted
while the STV-250N Stereo Video Cable is
connected
to the camcorder.
• We recommend
powering
the camcorder
using the compact
power adapter.
• We recommend powering the camcorder
using the compact power adapter.
• By default, the on-screen displays will be
embedded in the output video signal, but you
can change the displays by repeatedly pressing
Advertisement
Table of Contents
