Table of Contents
Advertisement
Quick Links
| IWTxT SERIES
WIRELESS 4-20mA TRANSMITTER OPERATING MANUAL
WIRELESS TRANSMITTER WITH TX SUPPLY
ADDS WIRELESS FUNCTIONALITY TO ANY 4-20 mA TRANSMITTER
Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility
for damage, injury, loss, or expense resulting from errors or omissions, and reserve the right of
amendment without notice.
Information for users
This equipment has been tested and found to comply with the limits for a Class B device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
•
•
Connect the equipment into an outlet on a circuit different from that which the receiver is
connected
Consult the dealer or an experienced radio/TV technician for help
•
Caution: To satisfy FCC RF Exposure requirements for mobile and base station transmission
devices, a separation distance of 20cm or more should be maintained between the antenna of this
device and persons during operation. To ensure compliance operation at closer than this distance
is not recommended. The antenna used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. No other antenna may be used with this
equipment other than the PCB antenna supplied with this equipment.
This document may not be reproduced in any way without the prior written permission of the company.
opyright © 2021 Sensata Technologies, Inc.
C
|
IWTxT Series
Cynergy3 Components Ltd
7 Cobham Road, Ferndown Industrial Estate, Wimborne
Dorset BH21 7PE, United Kingdom
Tel: +44(0)1202 897969, email: sales@cynergy3.com
www.cynergy3.com
Page 1
Advertisement
Table of Contents
Summary of Contents for Cynergy3 Sensata IWTxT Series
- Page 1 This document may not be reproduced in any way without the prior written permission of the company. Cynergy3 Components Ltd 7 Cobham Road, Ferndown Industrial Estate, Wimborne Dorset BH21 7PE, United Kingdom Tel: +44(0)1202 897969, email: sales@cynergy3.com www.cynergy3.com Page 1 opyright © 2021 Sensata Technologies, Inc.
-
Page 2: Table Of Contents
| IWTxT SERIES WIRELESS 4-20mA TRANSMITTER OPERATING MANUAL CONTENTS INTRODUCTION _______________________________________________________ 3 Safety Information ________________________________________________________ 3 Hardware Features _______________________________________________________ 3 UNPACKING __________________________________________________________ 4 PRODUCT IDENTIFICATION LABEL _____________________________________ 4 INSTALLING/CHANGING THE BATTERY ________________________________ 4 SETTING UP THE IWCTT WIRELESS TRANSMITTER _____________________ 5 TROUBLE-SHOOTING GUIDE __________________________________________ 8 SYSTEM PART NUMBERS ______________________________________________ 9 SPECIFICATIONS ______________________________________________________ 9... -
Page 3: Introduction
Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO Cynergy3 Components Ltd. OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. -
Page 4: Unpacking
| IWTxT SERIES WIRELESS 4-20mA TRANSMITTER OPERATING MANUAL UNPACKING The instrument should be carefully inspected for signs of damage that may have occurred in transit. In the unlikely case that damage has been sustained, DO NOT use the instrument, but please retain all packaging for our inspection and contact your supplier immediately. -
Page 5: Setting Up The Iwctt Wireless Transmitter
Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO Cynergy3 Components Ltd. OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. - Page 6 | IWTxT SERIES WIRELESS 4-20mA TRANSMITTER OPERATING MANUAL 5 seconds 0 0 1 1 seconds 0 1 0 30 seconds 0 1 1 60 seconds 1 0 0 2 minutes 1 0 1 5 minutes 1 1 0 10 minutes 1 1 1 Switches 7 and 8 control the settling time of the 4 –...
- Page 7 Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO Cynergy3 Components Ltd. OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN.
-
Page 8: Trouble-Shooting Guide
| IWTxT SERIES WIRELESS 4-20mA TRANSMITTER OPERATING MANUAL • LED does a single green flash – failed to send The button wakes the sensor up, and the first green flash is seen. After the settling time and reading of the mA value, it sends the data to the IWR Receiver. The data send failed, so there was no second flash. -
Page 9: System Part Numbers
Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO Cynergy3 Components Ltd. OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. - Page 10 • connected • Consult the dealer or an experienced radio/TV technician for help Warning: Changes or modifications not expressly approved by Cynergy3 could void the user’s authority to operate the equipment. RF Exposure Contains FCC ID: W70MRF24J40MDME In this equipment, the antenna supplied is a PCB antenna and an alternative antenna must not be used.
- Page 11 Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO Cynergy3 Components Ltd. OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN.
Need help?
Do you have a question about the Sensata IWTxT Series and is the answer not in the manual?
Questions and answers