Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Sandberg 134-30
- Page 1 ConfCam PTZ x10 Remote 1080P Quick guide 134-30 www.sandberg.world...
-
Page 2: Product Overview
Quick guide Product overview 1. Lens 3. USB2.0: USB 2.0 Video output interface 4. IR receiver 5. DC 12V IN: Power supply 2. IR receiver Power on 6. VISCA: RS-232, RS-485 control Indicator Remoting Standby... -
Page 3: Mounting Options
On a Desk On a tripod, for example Sandberg item no. 134-26 Screw the wall mount bracket on the wall, refer to the following picture 1. Fasten the camera on the wall mount bracket, refer to the following picture 2. - Page 4 Quick guide Connection Optional Visca-connection RS-232/485 USB2.0 (Dual USB-plug for DC by USB)
-
Page 5: Software Installation
Software installation The camera works driver-less and is compatible with most chat-applications. The camera has no built in microphone. We recommend to use the camera together with Sandberg Speaker Phone or another audio device with microphone and speaker. Choose this device name on the device... -
Page 6: Remote Control
Quick guide Remote control Open the back of the remote control and insert 2 x AAA batteries. -
Page 7: Osd Menu Introduction
Quick guide OSD Menu Introduction Dome Menu Protocol Dome Address Lens Menu Exposure Brightness Dome Protocol Backlight Buadrate Back Shutter Flicker Back Dome IR Address Pan Speed Color Tilt Speed Saturation Preset Freeze Sharpness Preset Resume Back Color Temp Back Information Version Image... - Page 8 Quick guide DOME OSD Press the “Dome OSD” button on the remote control to log in Dome Menu as follow. Press again same button to log-off OSD Menu. DOME Menu Protocol Dome Address: Choose dome address Adjustable Value: 1-7; Default: 1 Dome Protocol: Choose control protocol Optional: Visca/Pelco_D;...
- Page 9 Quick guide Dome IR Address: Choose IR address Adjustable Value: 1-3; Default: 1 Pan Speed: Pan movement speed Adjustable Value: 1-24; Default: 14 Tilt Speed: Tilt movement speed Adjustable Value: 1-18; Default: 10 Preset Freeze: Image freezing during Optional: On/Off; Default: Off preset call Preset Resume: Location resume Optional: Off/30s/60s/90s;...
- Page 10 Quick guide LENS OSD Press the “Lens OSD” button on the remote control to log in Lens Menu as follow. Press again same button to log-off OSD Menu. LENS Menu Exposure Brightness: Adjust image brightness Adjustable Value: 0-255; Default: 64 Backlight: Adjust the backlight Optional: Off / On;...
- Page 11 Quick guide Color Hue: Adjust image hue Optional: 0-100; Default: 50 Saturation: Adjust image saturation Optional: 0-100; Default: 50 Sharpness: Adjust image sharpness Optional: 0-127; Default: 50 WB: Select white balance mode Optional: Auto/Manual; Default: Auto Color Temp: Adjust color temperature Optional: 1500-15000;...
- Page 12 Quick guide Language OSD menu language OSD Mirror Mirror the On Screen Display menu Exit Log-off DOME OSD Menu Notes: 1. No Pan/Tilt movement function while OSD Menu on screen. 2. Address code, protocol, baud rate, picture freeze, preset memory function do not change after Reset of remote control. 3.
- Page 13 Quick guide Remote Control Function Description 1. Reset / Power 2. Address code selection key: camera address code and remote control address code corresponding, can realize control. (No.4 key is reserved) 3. PTZ control key: control PTZ movement and return to the original position.
- Page 14 Quick guide Regional Keynote Functions Reset Restart camera and back to default factory settings. Power ON/OFF Power ON/OFF Choose camera according to your remote control Camera ID Choose (“4” is reserved key) Move camera up-side Move camera down-side Pan/Tilt control Move camera go left Move camera go right Return to the original position...
- Page 15 Quick guide Regional Keynote Functions ZOOM Control Zoom out / in Login Dome OSD Menu (Press again to log-off OSD.) Login Lens OSD Menu OSD Menu (Press again to log-off OSD.) Control the camera flip and mirror image To “Set” as preset position Preset position To “Clear”...
-
Page 16: Warranty
Support http://helpdesk.sandberg.world Warranty There is a five-year warranty on your Sandberg product. Please read the warranty terms and register your new www.sandberg.world/warranty Sandberg product at Years Warranty For information on handling electronic waste, see www.sandberg.world/weee...