Pch Configuration - Gigabyte E251-U70 User Manual

5-3-7 PCH Configuration

Parameter
PCH Configuration
PCH SATA Configuration
(Note 1) Only appears when HDD sets to RAID Mode.
Description
Press [Enter] to configure advanced items.
SATA Controller
Š
– Enable/Disable SATA controller.
– Options available: Enable/Disable. Default setting is Enable.
Configure SATA as
Š
– Configures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI
functionality. Then the RAID function is disabled and cannot be
access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both its
RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.
– Options available: AHCI/RAID. Default setting is AHCI.
Alternate Device ID on RAID
Š
– Enable/Disable Alternate Device ID on RAID mode.
– Options available: Enable/Disable. Default setting is Disabled
SATA Port 0/1/2/3/4/5/6/7
Š
– The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
- 81 -
(Note 1)
BIOS Setup