Use - Atag WU7111HM Instructions For Use Manual

USE

Controls
Switching the fan on and off
• Switch the fan on with the on/off button (A) and select the desired
extractor setting with buttons 'B' and 'C'.
The 'I' display indicates which setting has been selected.
• Use button 'D' to switch on the intensive setting.
"HI" appears in the 'I' display.
After 6 minutes the intensive mode is automatically reduced to the
setting previously selected.
Switching the lighting on and off
• Use the 'G' button to switch the lighting on and off.
Dimming the lighting
• Dim the lighting with button 'H'.
The strength of the lighting varies between maximum and minimum,
and vice-versa.
Clean Air function:
With the Clean Air function you can refresh the air in the kitchen
over maximum 24 hours.
• Make sure the extractor cap has been switched off.
• Press on the Clean Air button 'E'.
Every hour, the extractor cap will switch on for 10 minutes
automatically, at the lowest extraction setting. The display reads
"24" and an indicator flashes at the bottom right.
I
EN 5