Download Print this page

Ashford TPLM11 Instructions Manual

Tapestry loom

Advertisement

Quick Links

Ashford Handicrafts Limited
Factory and Showroom: 415 West Street
PO Box 474, Ashburton 7700 New Zealand
Telephone 64 3 308 9087 Facsimile 64 3 308 8664
Email: sales@ashford.co.nz Internet: www.ashford.co.nz
INSTRUCTIONS
TAPESTRY LOOM
Large - 103cm (40") weaving width
Includes warping and weaving instructions
Ashford Guarantee
Thank you for purchasing this Ashford product. In the unlikely event there is
any fault in manufacture we will replace the item. To validate our guarantee
please visit our website or write to us.
TPLM17032017V5

Advertisement

loading

Summary of Contents for Ashford TPLM11

  • Page 1 Ashford Guarantee Factory and Showroom: 415 West Street Thank you for purchasing this Ashford product. In the unlikely event there is PO Box 474, Ashburton 7700 New Zealand any fault in manufacture we will replace the item. To validate our guarantee Telephone 64 3 308 9087 Facsimile 64 3 308 8664 please visit our website or write to us.
  • Page 2 ASSEMBLY INSTRUCTIONS FOR THE ASHFORD TAPESTRY LOOM Loom Assembly Step 1. Push the nylon bushes into the holes in the top rail. Tension knob Step 2. Attach the top rail to the loom sides using 50mm (2”) screws. Check the nylon bushes face up & the top rail &...
  • Page 3 Floor Stand Assembly Step 6. Step 7. Locate 2 wooden dowels into the holes in a foot. Locate wooden dowels into the 2 outside holes Position a leg onto the foot & secure with a 130mm in both ends of the bottom spacer & then secure (5”) bolt, small washer &...
  • Page 4 Pencil, ruler, scissors, Ashford Tapestry Beater, lines every 12.5mm (1/2”) according to the width of Ashford Tapestry Loom Warp Thread (7 wraps per your tapestry. Pencil can be rubbed out & the lines cm or 17-18 per inch) for the warp, weft yarns of re-marked for your next tapestry.
  • Page 5 Step 9. Check all the warp threads are on a pencil mark. Step 10. Sit down, position the loom on your knees & tighten the handles. Step 11. Turn the 2 tension knobs to tighten the warp as necessary. Step 12. Place the locking peg into a hole in either leg to prevent the loom rotating.
  • Page 6 Weaving Needles Tapestry Beater Tapestry Bobbin For more weaving tips, ideas and techniques refer to The Ashford Book of Rigid Heddle Weaving and www.ashford.co.nz Ashford Handicrafts Limited Factory and Showroom: 415 West Street PO Box 474, Ashburton 7700 New Zealand Telephone 64 3 308 9087 Facsimile 64 3 308 8664 Email: sales@ashford.co.nz Internet: www.ashford.co.nz...