Advertisement
Quick Links
Page 1 of 3
WARNING: ADULT ASSEMBLY REQUIRED
WARNING: Assembly kit contains parts with sharp edges.
WARNING: Assembly kit contains parts with sharp points.
WARNING: Package contains plastic bags that present suffocation risks for children.
WARNING: Assembly kit contains small parts that present choking hazards for children.
Assembly Instructions for Storage Cubby Item #64
Contents:
Angle Brackets Qty 2
Left Side Qty 1
Quality Wooden Children's Furniture and Accessories
Made in America
www.littlecolorado.com
Top Qty 1
Horizontal Panel Qty 2
Back Panel Qty 3
Bottom Qty 1
•
Established 1987
Pilot Hole for Bracket
Vertical Panel Qty 2
Revised 06/17
by
D. Dominguez
1 1/4" Screws Qty 30
5/8" Screws Qty 6
1/2" Screws Qty 4
Right Side Qty 1
Advertisement
Summary of Contents for Little Colorado Storage Cubby 64
- Page 1 Page 1 of 3 Revised 06/17 D. Dominguez Quality Wooden Children’s Furniture and Accessories Made in America • Established 1987 www.littlecolorado.com WARNING: ADULT ASSEMBLY REQUIRED WARNING: Assembly kit contains parts with sharp edges. WARNING: Assembly kit contains parts with sharp points. WARNING: Package contains plastic bags that present suffocation risks for children.
- Page 2 Page 2 of 3 Revised 06/17 1. Identify all parts per the attached sketches. Some parts are very similar. 2. Build the outer frame consisting of the Right and Left sides, Top and Bottom. All slots face inside and all panels fi t securely in the slots. All screws go into pre-drilled holes only. The easiest method to build the assembly is with the front (rounded) edges facing down on the fl...
- Page 3 If you have questions about assembling this product, please call us and we will help you. All of us at Little Colorado, LLC hope that you and your little ones enjoy this Storage Cubby for many years. Please call us if you have any questions.