1x2 component video splitter distribution amplifier (9 pages)
Summary of Contents for Shinybow USA SB-3686A
Page 1
SB-3686A NTSC/PAL To/From NTSC/PAL DIGITAL VIDEO CONVERTER w/VGA, HDMI and Composite Video...
Page 2
SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.
MultiVideo Digital Converter Series Thank you for purchasing the SB-3686A Video To HDMI Digital Converter. You will find this unit easy to install and highly reliable but it is essential that you read this manual throughly before attempting to use Video To HDMI Digital Converter.
FEATURES & SPECIFICATIONS FEATURES • Multi-Video Input from (4) Video/Comp/VGA/HDMI to (3) Video/VGA/HDMI Digital Converter • Supports HDMI 1.3 formats (225MB) and suits HDMI V1.3 transmitter & receiver • Compliant with HDMI 1.3, DVI 2.0, and HDCP 1.2 • Input Supports: •...
FRONT PANEL FRONT PANEL 1. POWER LED: The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving power. The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last configuration will be evoked.
Page 6
FRONT PANEL FRONT PANEL 8. LOCK BUTTON: - Press and hold LOCK button for three seconds lockout the front panel and LED display show out. - Press and hold LOCK button for three seconds to enable the front panel. 9. MUTE BUTTON: - Press and hold MUTE button for three seconds the mute the audio and the LED display show out.
BACK PANEL BACK PANEL 1. DC POWER INLET / OUTLET: POWER JACK: The converter suits a DC power plug- pack input connector. Please ensure the plug-pack used is of an DC Jack - Inner OD Ø 2.1 mm (+) approved type and of correct current, voltage output, and connector Outside OD Ø...
Page 8
BACK PANEL BACK PANEL 6. VGA OUTPUT: VGA (RGBHV) 1x HD-15P female socket. Connects a VGA (RGBHV) signal source to the Note: With D-SUB-HD15P female socket. VGA connector. 7. HDMI OUTPUT: HDMI female connetor Connects a HDMI digital video/audio signal link Note: With proper adapters, the scaler can direct to the female HDMI connector, which supports HDMI digital be used with DVI digital video signals, and...
REMOTE CONTROL & REMOTE PROTOCOL COMMANDS Before making any connections observe the following: • Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%). • Ensure that the power switch is OFF. • Ensure that all system grounds (earth) are connected to a common point. •...
Page 10
IR DATA CODE LIST IR REMOTE CUSTOM AND DATA CODES (NEC Standard) HOW TO SETUP IR CODES : CUSTOM CODE : 53AC POWER ON: 53AC A15E POWER OFF: 53AC A25D VIDEO SOURCE : VIDEO 53AC BB44 S-VIDEO 53AC 916E SCN-ADJ.: ENTER 53AC AB54...
TYPICAL APPLICATION INSTALLING DIAGRAM Sample Connection: 1. Using a IR remote to control the Switch-Converter (SB-3686A). 2. Input source supports: Composite video, S-Video(Y/C), VGA (RGBHV) and HDMI total (4) source devices. 3. Output Supports: NTSC/PAL TV, VGA Monitor or HDMI displays.
Page 14
LIMITED WARRANTY PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER SHINYBOWUSA, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to SHINYBOWUSA, Inc.
Need help?
Do you have a question about the SB-3686A and is the answer not in the manual?
Questions and answers