Switching On And Off; Cleaning And Maintenance - MADER KWIW1802-20 Instructions Manual

8.3 F /
ORWARD REVERSE SWITCH
• Push the forward/reverse switch (2) from right to left side to drill holes and
fasten screws.
• Push the forward/reverse switch (2) from left to right side to loosen screws.
Always wait until the motor has come to a complete standstill before
changing the direction of rotation.
8.4 S
WITCHING ON AND OFF
• To switch on the machine, press the on/off switch (1).
• To switch off the machine, release the on/off switch.
8.5 V
ARIABLE SPEED
• Applying more pressure to the on/Off switch will increase the speed.
• Applying less pressure to the On/Off switch will decrease the speed.

9. CLEANING AND MAINTENANCE

Attention! Before performing any work on the equipment, pull the power
plug.
9.1 C
LEANING
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.