Summary of Contents for GMI D6048S
- Page 1 D6048S INSTRUCTION MANUAL SIL 3 Digital Output Driver, NE Loads, Loop Powered, DIN-Rail and Termination Board, Model D6048S D6048 - SIL 3 Digital Output Driver, NE Loads, Loop Powered G.M. International ISM0413-0...
- Page 2 Its use is allowed in applications requiring up to SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries. The Safety PLC or DCS driving signal powers the field device through the D6048S, which provides isolation and is capable of monitoring the conditions of the line.
- Page 3 Ordering information Power Bus and DIN-Rail accessories: Model: D6048S Connector JDFT049 Cover and fix MCHP196 Terminal block male MOR017 Terminal block female MOR022 Front Panel and Features SIL 3 according to IEC 61508:2010 Ed. 2 for life time = 20 years.
- Page 4 Function Diagram MODEL D6048S MODEL D5048S Solenoid Valve Solenoid Load Valve Solenoid Diag. Valve Control Out A Out B Out C Transistor Fault Out (SIL 3) Out Override Termination Fault Bus board connector NOTE: Use only one output at a time (Out A or Out B or Out C).
- Page 5 It can also be used as a controllable supply to power measuring or process control equipment. Its use is allowed in applications requiring up to SIL 3 level (according to IEC 61508) in safety related systems for high risk industries. The Safety PLC or DCS driving signal powers the field device through the D6048S, which provides isolation and is capable of monitoring the conditions of the line.
- Page 6 Configuration A configuration DIP switches are located on component side of pcb. These switches allows the configuration of override input and fault detection functions. D6048S SW1 factory settings All DIP-switches are ON SW2 factory settings DIP-switches 1-2-3 are ON and 4 is OFF...
Need help?
Do you have a question about the D6048S and is the answer not in the manual?
Questions and answers