- Test and make sure the safe works properly before mounting. Once tested, mount Setting Time Delay the safe before use. How To Activate Safe In Time Delay Mode NOTE: Barska is not responsible for any installation damages and any lost or Low Battery Warning stolen contents. Trouble Shooting...
PARTS OF THE SAFE 1. Use a Phillip’s Head screw driver to remove the screw on the top of keypad cover. A. Handle B. Indicator Lights C. Key Pad D. Battery Compartment (located behind key pad) E. Emergency Key Access (located behind key pad) BATTERY &...
5. Input “New User Code #” and 2 short beeps will be heard 6. Re-Input “New User Code #” and 2 short beeps will be heard, light stays green for 3 seconds CHANGE USER CODES 1. Press “ * * “ and 2 short beeps will be heard 2.
1. Press “ * * “ and 2 short beeps will be heard SETTING TIME DELAY (1-59 minutes time delay) 2. Press “158#“ and 2 short beeps will be heard 3. Input “ Current Master Code# ”and 2 short beeps will be heard 1.
- Make sure you are not in Time delay mode. BARSKA warrants this new safe to be free of original defects in material and/or - Replace the existing battery with new one. workmanship under normal use for a period of twelve (12) months from the date product is received by purchaser.