Related Manuals for Empire eLGC
Summary of Contents for Empire eLGC
- Page 1 25M GREEN SELF-LEVELING CROSS LINE LASER Operator’s manual Cat. no. eLGC WARNING! To reduce the risk of injury, user must read and understand the operator’s manual.
-
Page 2: Laser Safety
Maintain labels and nameplates. These carry LASER SAFETY important information. If unreadable or missing, contact WARNING! EMPIRE customer service for a free replacement. The product produces visible laser beams that are emitted from the product. ■ The product conforms to the most stringent... -
Page 3: Functional Description
See “Accuracy Field 25M GREEN SELF-LEVELING Check” section for information. CROSS LINE LASER CAT.NO.: eLGC 912303 SSSSSS MJJJJ SER. Turning the product on/off (4xAA) NEDA 15 A IEC LR6... -
Page 4: Troubleshooting
II on wall B. “Accuracy Field Check” for information. Should any deviation from the listed product accuracy be found, contact EMPIRE customer service. Failure to do so could result in rejection of the warranty claim. Influences on accuracy Ambient temperature gradients can impact laser accuracy. - Page 5 Checking the horizontal leveling accuracy 6. For the measuring distance of 2 x 10.06 m = 20.12 m, the maximum allowable deviation (d) is: 20.12 m x A free measuring space of approximately 10.06 m x 10.06 ±6.35 mm ÷ 10.06 m = ±12.70 mm. Thus, the difference m on a firm surface between two walls or structures A and B d between points I and III should not exceed 12.70 mm is required for the check.
-
Page 6: Maintenance
Never use flammable or **The warranty period for an ANZ EMPIRE® eLGC is three (3) years from the date of purchase. combustible solvents around products. ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT... - Page 8 Distributed by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mt. Waverly, 3149 VIC www.empiretools.com.au 1300 361 505 Techtronic Industries N.Z. Ltd Unit C, 70 Business Parade South, Highbrook, Auckland, 2013, New Zealand www.empiretools.co.nz 0800 279 624 00698000415Q1-01...