leadsun PBOX P6 User Manual

THE LEADER IN SOLAR LIGHTING TECHNOLOGY
TM
User Manual
Thank you for choosing PBOX P6 Solar home lighting system. In order to
avoid any incorrect operation, please read this user manual carefully
before installation.
Schematic of interfaces on the controller:
ON/OFF
Power indicator
Charging indicator
Type
Name of interface

Solar Charging
ф3.5DC socket
input
Lamps output
RCA socket
5VDC output
USB socket
WARNING: Do not use any equipment that goes beyond the limit of above
statement, or the controller will be damaged.
Color ON/OFF

Indicators
of LED switch
ON
Power
Blue LED
indicator
OFF
OFF
Charging
Green LED
indicator
ON
* Power ON
Power OFF
www.leadsun.com.cn Leadsun Electronic Technology Co.,Ltd.
6
In-line Switch
Solar Charging Input
5VDC
Lamps Output
Definition and Limit
Operating voltage: 18VDC;
Max power of solar panel: ≤25Wp
Working voltage: 12VDC;
Max current: ≤2000mA
Working voltage: 5VDC;
Max current: ≤1000mA
Description of Function
LED Status
●
Lamps and USB power on
Lamps and USB power off.
○
Can be charged only.
LED Flowing Charging
Battery capacity ≥80%
■■■
Battery capacity between 50%~80%
Battery capacity between 20%~50%
Battery capacity ＜20%
3 LEDs flash
Battery capacity ＜10%
Installation Guide:
1 Please check if all parts that are listed in the attached packing
list are included after opening the package.
2 Mount the solar module.
Mount the solar module on your roof (or other place with sufficient
sunshine) by attaching screws. Make the solar module face to
direction with the strongest sunshine and set its obliquity equal to
latitude of your city. Keep the solar module away from any shadow of
trees, building, cable, etc.
WARNING:
The controller allows no more than 25W power of the solar module
and the voltage must be no more than 18VDC. Otherwise the
controller will be damaged. We do not suggest users to prepare the
solar module by themselves.
3
Clean the surface of solar module.
Please clean the surface of solar module after finishing mounted. The
more clean on the surface of solar module, the more energy will be
obtained from sunshine.
4
Lead the cable of solar module into your room.
5 Fix the controller.
Place the controller at a dry and a proper place where allow you easy
operation.
6 Connect the cable of solar module to the Solar Charging Input
socket of controller.
7 Hang up the lamp holders and connect the cables to the Lamps
Output socket of controller.
8
Fix the lamps.
WARNING:
Only 12VDC lamps are allowed. And the max power of lamp should
be no more than 24W.
The output of the controller is DC voltage. Please pay attention to the
electrodes when you fix the lamps.
Do not short circuit the lamps holder output.
9
Turn on the controller (if the charging indicator is off or flashing,
means the battery needs to be charged).
TIPS: Turn off the controller while you don't use. This will help to
save energy.
10 Turn on the lamp switch.
Troubleshooting:
Fault
Item
Charging indicator is
1
OFF during charging
in daytime.
2 Can't turn on lamps
Can't charge mobile
3
phone
Add:
No.1 Pingdong 1st Rd, Nanping Tel: +86-756-2289712
industrial Park, Zhuhai, China. Fax: +86-756-8682090
Fault Diagnosis
Check if there is sunlight Follow the step 2
irradiation above the solar module. and 3 of installation.
Check if the solar module is
Follow the step 6 of
connected to the controller
installation.
correctly.
Check the ON/OFF switch of the Turn off the
controller. No charging indication controller and check
if it's ON. if it's charging.
Turn on the switch of the
controller. If charging indicator is
Charging the battery.
flashing or off, means the battery
needs to be charged.
If the charging indicator is on, Turn on the lamps
check if the lamps switch is on.
switches.
If the charging indicator and lamp
Follow the steps 7 and
switch is on, check if the lamps
8 of INSTALLATION
and cables are well connected.
GUIDE.
Turn on the switch of the
controller. If charging indicator is
Charging the battery.
flashing or off, means the battery
needs to be charged.
If the charging indicator is on,
Re-connect USB cable
check if the USB cable is well
or change a now one.
connected.
Check if the mobile phone is
well-known brand.
Solution
OP6.001-A