Switching The Machine To Pause Mode; Changing The Programme Selection After Programme Has Started - Beko WER860541G User Manual

4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started
If the water level in the machine is suitable when you press Start/Pause button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once
again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause button, the door lock
cannot be deactivated and the door lock icon on the display remains on.
C
If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons,
even if the water level is suitable.

Switching the machine to pause mode:

Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash on the display.

Changing the programme selection after programme has started:

The programme change is allowed when the current programme is running unless the Child Lock is enabled.
This action will cancel the current programme.
C
The selected programme starts anew.
26 / EN
•
Remove the loading door emergency handle behind the filter cover with
a tool.
•
Open the loading door by pulling the loading door emergency handle
downwards.
•
Try to pull the handle downwards again if the loading door is not opened.
•
Bring the loading door emergency handle to its original position after
opening the loading door.
:
Washing Machine / User Manual