Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for GPS Tracker TV680
- Page 1 TV680 GPS Watch User’s Manual...
-
Page 2: Table Of Contents
Table of Contents Chapter I Preface………………………………………………….. ………………………………………………………..3 I．General……………………………………………………………. ……………………………………………………..3 II．Notices…………………………………………………………….. ……………………………………………………..3 Chapter II about the Device………………………………………………………………………………………………...3 1. Appearance…. ……………………………………………………………………………………………………………..3 2. Product Features……………………………………………………………………………………………………..…….4 3. Product Specification……………………………………………………………………………………………..……….5 Chapter III Usage Preparation………………………………………………………………………………..……………6 I.Accessories…………………………………………………………………………………………………..……………..6 II.Appearance and Interface………………………………………………………………………………..……………...7 III.Charge the Battery……………………………………………………………………………………..……………….8 IV.Installation of SIM Card……………………………………………………………. ……… ….. ….… ……………...8 ChapterIV Commands Corresponding to and Operation Method of Basic Functions………….………... -
Page 3: Chapter I Preface
Chapter I Preface I. General TV680 represents the perfect combination of GSM and GPS technologies. This model, with its precise dimensions and compact appearance, expresses the advanced workmanship in the GSM and GPS field. It is a typical design combing communication products and GPS services. -
Page 4: Chapter Ii About The Device
Chapter II about the Device TV680, as a personal remote positioning device made up of GPS module and GSM/GPRS module, is compact in dimensions with high accuracy. On the basis of GPS satellites and under dynamic conditions, it can provide you with accurate and correct location information. -
Page 5: Product Specification
3 Product Specifications (1). Technical Specifications GSM module GSM 850/900/1800/1900 MHz Quad frequency GPS sensitivity -163dBm GPS center frequency L1, 1575.42MHz GPS positioning accuracy 5-25m GSM positioning accuracy 100-500m Speed accuracy 0.1 m/s Time accuracy Synchronous with GPS GPS Datum WGS-84 Hot start <... -
Page 6: Chapter Iii Usage Preparation
Chapter III Usage Preparation I. Accessories 1. Main unit 2. USB data cable 3. Charger 4. Headset cable (optional) 5 Battery II. Appearance and Interface 1. Appearance and Buttons Five buttons are equipped with this watch The upper left button serves for switch-on and hold-on The bottom left button serves interface switch... -
Page 7: Iii.charge The Battery
2. Interface Definition GSM signal strength is indicated on the upper left corner of the main interface as showed in picture 2: Bottom left button is for interfaceswitch as showed in picture 3: III. Charge the Battery Please use up the battery and discharge it for 2-3 times and then charge the battery for at least 12 hours for initial use, in order to keep the quality of the battery. -
Page 8: Iv.installation Of Sim Card
Notes: Please always use the charger offered by the supplier. Dangers damages of the product caused by usage of any unconfirmed charger will not be compensated and repaired. The battery should be charged in time when the terminal automatic shutdown or being alarmed with low power. The standby duration and call duration offered by the supplier is calculated in perfect functional mode, in practice, working hours of the battery may vary due to difference of internet service, functional mode and usage mode. -
Page 9: Setup Of Centre Number
Google link function Send command 999 plus password to the terminal, then the terminal will return a piece of detailed url. The google link can show google map on the mobile phone after be clicked. For example: 9990000 2. Setup of Centre Number Set the centre number by SMS through the mobile phone, after the setup is successful, then the mobile phone that sending the SMS will receive the “&710&successful setting&&”... -
Page 10: Monitoring Function
SOS button, the terminal will send alarming information to the center number and dial the three ward numbers in turn. SOS SMS format: IMEI number: SOS (information about latitude and longitude or base station) Example: 356823031017473:SOS（11354.6397,E,2232.6283,N）or 356823031017473:SOS（26280E77） Remarks: when interface in picture 5 appears on the phone, the terminal will skip to standby mode automatically; sound and interface during the dialing will be completely shielded. -
Page 11: Set User Name Command
response information or ‘&770&PASSWORD ER&&’ if the password is wrong. ① Send command to the terminal. ② The terminal return confirmation message to the mobile phone. 9. Set User name Command SMS Command Format: #801#4~20-digit letters or numbers #4-digit password ## Example: #801#13900139000#0000## Notes: After executing this command, the user name of the terminal on GPRS mode is required to be set up according to actual demand. -
Page 12: Low Voltage Alarming Function
Setup via domain name: Example: #803#www.xxxx.com#9876#0000## 12. Low-Voltage Alarming Function If the terminal of the ward has a very low power and needs to be powered off, the terminal of the ward will automatically upload one piece of low-voltage alarming command to the monitoring center number. SMS Format: IMEI Number: low power;... - Page 13 (2) Fence Reading Function Send commands to the terminal: # command number (752) # user password 4 digits ##; after the command is set successfully, the terminal will read the data of the module fence working status and return message to the sending mobile phone, or PASSWORD ER if the password is wrong.
-
Page 14: Auxiliary Functions
15. Auxiliary Function (1) #901## Command of inquiring machine parameters (2) #902## Command of inquiring GPRS parameters (3) #904## GPRS connection command (4) #905## GPRS disconnection command Notices 1. This device is of non-waterproof design. 2. This device must work with the cooperation of GSM/GPRS network. 3.