Download Print this page
Banzai AQUA BLAST MOTORIZED BUMPER BOAT Quick Start Manual

Banzai AQUA BLAST MOTORIZED BUMPER BOAT Quick Start Manual

Advertisement

Quick Links

1.
Controller Unit With Water Blaster x 1
3.
4.
Propeller Unit x 1
Pipe Cover x 1
I
II
3
4
Parts
and
are shipped
together and
must be
separated before
4
assembling this
item.
IMPORTANT SAFETY INSTRUCTIONS.
PLEASE READ AND SAVE THESE INSTRUCTIONS BEFORE SETUP AND USE.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
FOR AGES 5-10
ADULT SET UP IS REQUIRED.
2.
Inflatable Motorized Bumper Boat™ Body x 1
5.
Repair Patch x 1
A
III
3
Press the
release latches
(A) and push
3
downward
while pulling up
part
4
.
Safety Information
WARNING!
To avoid the risk of serious injury or death;
• Intended for only children aged 5-10.
• Motorized Bumper Boat™ is intended to be used as
a toy and not as a personal flotation device.
• Do not hang on or stand on the Motorized Bumper
Boat™ when playing.
• Do not use a high-pressure pump to inflate.
• Do not use an electric air pump if water or moisture
is present. This may result in electric stock.
• The total weight limit for the Motorized Bumper
Boat™ is 100 lbs (45 kg), and it is designed to hold
one child.
• Use product in swimming pool only.
• Read all instructions before using the Motorized
Bumper Boat™.
• Do not shoot water blaster cannon directly at
person's eyes or face.
• Never drive Motorized Bumper Boat™ over the
swimmers.
• Do not dive underneath Motorized Bumper Boat™.
• Stop using Motorized Bumper Boat™ if there is any
damage to the propeller safety cage.
• Disregard of and not following the instructions from
manual and warnings could result in injury or death,
especially for children.
• All inflatables are temperature sensitive, therefore
never unfold or inflate in temperatures below 50°F.
• Once inflated, make sure that the product does not
come in contact with stones, gravel or other sharp
objects, which could puncture the inflatable.
• To extend the life of the Motorized Bumper Boat™,
avoid any unnecessary overexposure to direct
sunlight. Excessive sun exposure may prevent
premature material fatigue and may cause leakage.
While every attempt is made to embody the highest
degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all
risk of injury resulting from use. All merchandise is
sold on this condition, which no representative of the
company can waive or change.
Once assembled according to the instructions
provided, confirm that this battery-operated toy is
fully functional before placing in the water.
This is not a lifesaving device. Do not leave a child
unattended while the device is in use.
Only to be used in water in which the child can
comfortably stand up.
For use in pools only and under adult supervision.
REPAIR PATCH INSTRUCTIONS
For your convenience, a repair patch has been
included to repair holes in the inflatable section.
Do not use the patch for holes or rips on the seam.
In the event of an accidental puncture, cut out a
suitably sized patch. Make sure you round the
corners of your repair patch to avoid peeling. Make
sure the area to be patched is clean and dry. Press
patch firmly over the puncture. Do not inflate for 20
minutes.
PLEASE RETAIN THIS INFORMATION
FOR FUTURE REFERENCE.
COLORS AND CONTENT MAY VARY.
CHANGHUANG ROAD,
CHANGPING, DONGGUAN, CHINA
ALL RIGHTS RESERVED
MADE IN CHINA
www.toysinquiry.com

Advertisement

loading

Summary of Contents for Banzai AQUA BLAST MOTORIZED BUMPER BOAT

  • Page 1 Safety Information WARNING! While every attempt is made to embody the highest degree of protection in all equipment, we cannot To avoid the risk of serious injury or death; guarantee freedom from injury. The user assumes all risk of injury resulting from use. All merchandise is •...
  • Page 2 BEFORE RETURNING TO STORE PLEASE VISIT THE CUSTOMER SERVICE WEBSITE BELOW FOR IMMEDIATE ASSISTANCE REGARDING QUESTIONS OR PROBLEMS WITH THIS PRODUCT. www.toysinquiry.com 1 - 8 0 0 - 4 3 4 - 6 1 7 8 BANZAI 2 BANZAI 3...
  • Page 3 8. Attach the controller unit to the top of the propeller pipe by aligning the connectors and pressing the unit down until it clicks twice. NOTE: If you do not hear 2 clicks, the controller unit is not properly attached to the propeller pipe. For easier assembly, push at the positions shown. BANZAI 4 BANZAI 5...
  • Page 4 3. There should be a minimum of 6 ft (183 cm) between the product and the swimming pool wall to prevent the possibility of the child falling off and hitting his head on the edge of the pool’s wall. BANZAI 6 AUG.2016...