Wincomm WTP-9C66 Series User Manual
  1. Manuals
  2. Brands
  3. Wincomm Manuals
  4. Control Panel
  5. WTP-9C66 Series
  6. User manual

Wincomm WTP-9C66 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WTP-9C66 Series
User's Manual
Version V 1.2
Copyright © 2017, ALL RIGHTS RESERVED.
All other brand names are registered trademarks of their respective owner

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WTP-9C66 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wincomm WTP-9C66 Series

  • Page 1 WTP-9C66 Series User’s Manual Version V 1.2 Copyright © 2017, ALL RIGHTS RESERVED. All other brand names are registered trademarks of their respective owner...
  • Page 2 The information contained in this document is subject to change without any notices. Acknowledgments Greeting & Setup Thank you for purchasing the WTP-9C66 Panel PC. We wish that this unit will be durable and reliable in providing your needs. Please follow the instructions below to ensure the unit continues to have high performance Unpacking After opening the carton, there will be a unit with an accessory box.
  • Page 3 If your hands are wet, do not touch the plug. Use your thumb and index finger, grip firmly on the power cord to disconnect from the electrical socket. By pulling the power cord, may result in damaging it. If the unit is not going to be in use for an extended period of time, remember to disconnect the unit. Connect the unit to a power source with the same numerical value as spec.
  • Page 4 If smoke or strange odor is flowing out of the open frame unit. If the power cord or plug is damaged. When the functions of the unit are dysfunctional. When part replacement is needed. Make sure service technician uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts.
  • Page 5 Version Change History Date Version Description Remark 2016/12/23 V1.0 First release 2017/07/13 V1.1 Add WEEE information 2017/08/18 V1.2 Add 9C66-15W &19W information...

  • Page 6: Table Of Contents

    How to Use This Manual ............ 1 System Overview ............. 2 Table Stand Assemble Instruction ....... 10 Wall Mount Stand Assemble Instruction ....12 System View ..............14 Setting up the System............17 Installing System Software ..........17 Installing the Drivers............17 BIOS Setup Information .........

  • Page 7: How To Use This Manual

    How to Use This Manual This manual is written for the system integrator, PC technician and knowledgeable PC end user. It describes how to configure your WTP-9C66 Panel PC to meet various operating requirements. The user’s manual is divided into three chapters, with each chapter addressing a basic concept and operation of the server board.

  • Page 8: System Overview

    System Overview WTP-9C66- 15 System FCBGA1168 5th generation Intel® Core i7/i5 processor (15W max.) Chipset Intel® integrated HD Graphics 5500 by CPU Intel i210AT Giga LAN x 2 Memory Two 1600 MHz DDR3L SODIMM socket support dual Channel, non-ECC, up to 16GB Serial ATA SATA 3, 600 MB/s transfer rate x 2 Serial port RS232,422,485 x 1 /RS232 x 1 Internal...
  • Page 9 Touch Screen Type 5 wire RES Glove Any type glove Point: Finger or touch pen Input mode Drag: Finger Interface Light Transmission 80±5% Hardness Glass thickness 2.4mm 1 .5%, Y 1 .5% Linearity ≦ ≦ Active area 308.11x232.09mm Resolution 4096x4096 Lifetime 35 million activations Storage...
  • Page 10 Material construction SUS304 stainless steel enclosure, chassis type Fanless cooling Water and dust protection IP66 / NEMA4X Operation Temperature 12V DC Input 0~40 (IEC60068-2-56, air flow cooling) ℃ 32V DC Input 0~30 (IEC60068-2-56, air flow cooling) ℃ 12V DC Input -20~55 ( IEC60068-2-56, air flow cooling)for wide ℃...
  • Page 11 14. Barcode reader 15. COM + Power 5V/2V 16. TPM 17. SUS316 Packing list 1. WTP-9C66-15 2. DVD-Title for driver and manual 3. Power adapter 4. Power cord Regulatory FCC, CE (EMC), VCCI class B Shock/Vibration/Drop Shock Vibration Drop Operating: Operating: According to ISTA Project 2A to Pulse shape...
  • Page 12 WTP-9C66-19 System FCBGA1168 5th generation Intel® Core i7/i5 processor (15W max.) Chipset Intel® integrated HD Graphics 5500 by CPU Intel i210AT Giga LAN x 2 Memory Two 1600 MHz DDR3L SODIMM socket support dual Channel, non-ECC, up to 16GB Serial ATA SATA 3, 600 MB/s transfer rate x 2 Serial port RS232,422,485 x 1 /RS232 x 1 Internal USB 2.0(5V) pin head x 4, 2 reserved for Mni-PCIE...
  • Page 13 Interface Light Transmission 80±5% Hardness Glass thickness 2.4mm 1 .5%, Y 1 .5% Linearity ≦ ≦ Active area 308.11x232.09mm Resolution 4096x4096 Lifetime 49 million activations Storage 2.5” SATA drive bay x 1 Expansion slots Mini-PCIe Expansion slots Mini-PCIe External water/dust resistant I/O (rear side) 1 x M12 8pin for USB 1/2 1 x M12 8pin for USB 3/4 1 x M12 8pin for COM 1/RS-232...
  • Page 14 Storage Temperature -20~60 ℃ Operation Relative Humidity 10%~90%, non-condensing Storage Relative Humidity 10%~90%, non-condensing Dimensions 458x386x64 Net Weight 11.5Kg Gross Weight 15Kg Mounting VESA (100x100 mmxmm) side mount (M6*2) Supported OS Win 7, Win 7 Pro, Win8.1, Win 10 Options 1.
  • Page 15 FCC-B, CE (EMC), VCCI class B Shock/Vibration/Drop Shock Vibration Drop Operating: Operating: According to ISTA Project 2A to Pulse shape H alf-sine 5 ~ 500Hz , Acceleration 1 .0G determine a drop height in the ： ： Sweep time 1 5 minutes waveform following chart.
  • Page 16 Table Stand Assemble Instruction Step 1. Please check out the following parts before assemble. Item Quantity Table Stand Black Silicone Washer Black Handle Step 2. Please follow the picture diagrams to assemble. Explode View...
  • Page 17 Step 3. Please tighten the black handle in a clockwise direction.

  • Page 18: Wall Mount Stand Assemble Instruction

    Wall Mount Stand Assemble Instruction Step 1. Please check out the following parts before assemble. Item Quantity Wall Mount Stand Black Silicone Washer Black Handle...
  • Page 19 Step 2. Please follow the picture diagrams to assemble. Explode View Step 3. Please tighten the black handle in a clockwise direction.

  • Page 20: System View

    System View...
  • Page 21 WTP-9C66-15 Outline Drawing...
  • Page 22 WTP-9C66-19 Outline Drawing...

  • Page 23: Setting Up The System

    Setting up the System The following is a summary of the steps in setting up the system for use. CAUTION: Make sure that power to the system and each of the devices to be connected is switched OFF before plugging in the connectors. Make any required external connections such as the keyboard, and mouse.
  • Page 24 Step 1 – Install Intel® INF Driver Step 2 – Install Intel® VGA Driver Step 3 – Install Intel® LAN Driver Step 4 – Install Audio Driver Step 1 – Install Intel® INF Driver 1. Open fie of chipset 2. Click on the setup.exe 3.

  • Page 25: Bios Setup Information

    BIOS Setup Information BIOS Introduction The AMI BIOS (Basic Input / Output System) installed in your computer system’s ROM supports Intel processors. The BIOS provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also adds virus and password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system.
  • Page 26 Advanced Launch OpROM Support Launch PXE OpROM Enables or disables Boot Option for Legacy Network Devices. Launch Storage OpROM Enables or disables Boot Option for Legacy Mass Storage Devices with Option ROM. PCI Subsystem Settings PCI ROM Priority In Case of multiple Option ROMs (Legacy and EFI Compatible), specifies what PCI Option ROM to launch. PCI Latency Timer Value to be programmed into PCI Latency Timer Register.
  • Page 27 Set the ASPM Level: Force L0 – Force all links to L0 State : AUTO – BIOS auto configure : DISABLE – Disables ASPM. Extended Synch If ENABLED allows generation of Extended Synchronization patterns. ACPI Settings Enables ACPI Auto Conf Enables or Disables BIOS ACPI Auto Configuration.
  • Page 28 Selects DVMT/FIXED Mode Memory size used by Internal Graphics Device. IGD – Boot Type Select the Video Device which will be activated during POST. This has no effect if external graphics present. LCD Panel Type Select LCD panel used by Internal Graphics Device by selecting the appropriate setup item. Panel Scaling Select the LCD panel scaling option used by the Internal Graphics Device.
  • Page 29 Set Parameters of Serial Port 1 (COM C). Serial Port 2 Configuration Set Parameters of Serial Port 2 (COM D). Serial Port 3 Configuration Set Parameters of Serial Port 3 (COM E). Serial Port 4 Configuration Set Parameters of Serial Port 4 (COM F). Serial Port Console Redirection Serial Port Console Redirection.
  • Page 30 Boot Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup Numlock State Selects the keyboard NumLock state. Quiet Boot Allows you to determine whether to display the AMI Logo at system startup. Disabled displays normal POST message.
  • Page 31 Enables or disables the security chip. It is recommended that you use this function with the Administrator/User password.
  • Page 32 Save & Exit Save Changes and Exit Exit system setup after saving the changes. Discard Changes and Exit Exit system setup without saving any changes. Save Changes and Reset Reset the system after saving the changes. Discard Changes and Reset Reset system setup without saving the changes.

  • Page 33: Appendix

    Appendix A. Jumper settings and Connectors This appendix gives the definitions and shows the positions of jumpers, headers and connectors. All of the configuration jumpers on WTP-9C66 are in the proper position. Jumper and Connector Definition Block...
  • Page 34 JP1 – Touch Panel Type Selection Description Jumper Setting 3M type 1-2, 3-4 (default) ELO type 5-6,7-8 JP2 – LVDS Power Selection Description Jumper Setting +3.3VS(for 10”/12”/15”) 5-6, 7-8 +5VS(for 17”/19”) 1-2, 3-4 (default) JP3 – Backlight Type Selection Description Jumper Setting Analog Inverter PWM Inverter...
  • Page 35 Jump on =0, Jump off =1 JP15 jumper setting Panel Color Depth Resolution 800x600 6bit 1024x768 6bit 1024x768 8bit 1280x768 6bit 1280x800 6bit 1280x960 6bit 1280x1024 8bit 1366x768 6bit 1366x768 8bit 1440x900 8bit 1440x1050 8bit 1600x900 8bit 1680x1050 8bit 1600x1200 8bit 1920x1080 8bit...
  • Page 36 JP8 – CMOS Clear Description Jumper Setting Normal Open 1-2 (default) CMOS Clear JP9 – SATA / SATADOM Selection Description Jumper Setting SATA 2-3(default) SATA DOM JP10 – COM4 Power Selection Description Jumper Setting +5VS 2-3(default) +12VS JP11 – Heater Test Selection Description Jumper Setting Normal...
  • Page 37 RES Touch JP13 – Backlight Control Level Selection Description Jumper Setting +3.3V OPEN (default)

  • Page 38: 1.1 Connector Definition

    1.1 Connector Definition PJ1 /PJ2 – HDD Power Connector Pin # Signal Description +12VS +5VS PJ3 – Battery Connector Pin # Signal Description BATT+ BATT+ BATT+ BATT_T BATT_CLK BATT_DAT BATT_EN# Ground Ground Ground PJ4 – Power Jack Pin # Signal Description DC In DC In...
  • Page 39 PJ5 – Power Input Connector Pin # Signal Description DC In DC In...
  • Page 40 J1, J2, J11, J52, J53, J56 – Internal USB 2.0 Pin Header Pin # Signal Description +5VSB +5VSB Data - Data + J3 – LCD Inverter Wafer Header Pin # Signal Description +12VS +12VS Backlight Control Backlight Enable...
  • Page 41 J4 – MB Heater Connector Pin # Signal Description +12VSB J5, J6, J7, J8 – Panel Heater Connector Pin # Signal Description +12VSB J9 – Internal USB 2.0 Pin Header for PCT Touch Pin # Signal Description +5VSB +5VSB Data - Data + J10 –...
  • Page 42 Data - Data + J12 – Resistance Touch Screen Interface Signal Description Pin # 8-wire 4-wire 5-wire UL(X+) UL(X+) UL(X+) UR(Y+) UR(Y+) UR(Y+) PROBE LR(X-) LR(X-) LR(X-) LL(Y-) LL(Y-) LL(Y-) X+_DRIVE Y+_DRIVE X-_DRIVE Y-_DRIVE J13 – LVDS Interface Pin # Signal Description Pin # Signal Description...
  • Page 43 J14 – Panel Temp Sensor Connector Pin # Signal Description PANEL_SENSOR J15 / J22 – DDR3L SO-DIMM Interface H5.2/J22 H9.2 Symbol Symbo Symbol Symbol Symbol Symbol VREFDQ DQ27 DQS4 DQ31 DQ38 CKE0 DQ34 DQ39 DQ35 DQS0# DQ44 DQ40 DQS0 NF/A14 DQ45 DQ41 DQS5#...
  • Page 44 DQ10 DQS6# DQ14 DQ11 CK0# DQS6 DQ15 CK1# DQ54 DQ16 DQ50 DQ20 DQ55 DQ17 DQ51 DQ21 RAS# DQ60 DQS2# DQ56 DQ61 DQS2 CAS# DQ57 ODT0 DQ22 DQS7# DQ18 DQ23 DQS7 DQ19 DQ58 DQ28 DQ62 DQ24 DQ59 DQ29 VREFCA DQ63 DQ25 DQ32 DQ3# DQ36...

  • Page 45: Pin # Signal Description

    SDA_OUT SPI_PROG SPI_CLK SPI_DO SPI_DI SPI_CS J17 – Half Mini PCI Express Socket Pin # Signal Description Pin # Signal Description WAKE# +3.3VSB Reserved Reserved +1.5VS CLKREQ# Reserved Reserved REFCLK- Reserved REFCLK+ Reserved Reserved Reserved Reserved Reserved PERST# PERn0 +3.3VSB PERp0 +1.5VS SMB_CLK...

  • Page 46: Gnd

    CL_CLK Reserved CL_ DATA +1.5VS Controller Link RST# Reserved +3.3VSB J18 – 80 Port Pin # Signal Description Pin # Signal Description LPC_AD0 +5VS LPC_AD1 +3.3VS LPC_AD2 L80HLAT LPC_AD3 L80LLAT J19 –TPM / ID-394 Pin # Signal Description Pin # Signal Description +3.3VSB SUS_STAT#...
  • Page 47 +3.3VS LPC AD2 SERIRQ LPC AD1 PLT reset# LPC AD0 J20 – WRDM Pin Header Pin # Signal Description +3.3V_ALWAYS +5V_ALWAYS SOUT J21 – Battery Socket J23 – EC Reset connector...
  • Page 48 Pin # Signal Description WRST# J24 – GPIO Connect Pin # Signal Description Pin # Signal Description GEN_GPI1 GEN_GPO1 GEN_GPI2 GEN_GPO2 GEN_GPI3 GEN_GPO3 GEN_GPI4 GEN_GPO4 J25–PCIE X4 Slot for ISO Interface Pin # Side B Side A Pin # Side B Side A +5VSB +3.3VSB...

  • Page 49: Ground

    LPC_AD1 +5VS Ground ISOCOM_GPO3 LPC_AD2 +3.3VS Ground PCIE1_CLKRQ# LPC_AD3 ISOCOM_GPO1 PCIE_TXN Ground LPC_FRAME# USB_PWREN PCIE_TXP Ground PLT_RST# Ground Ground PCIE1_CLKN SERIRQ Ground PCIE_WAKE# PCIE1_CLKP Ground Ground Ground Ground UARTCLK_24M USBPP Ground Ground J26 – BIOS Socket Pin # Signal Description Pin # Signal Description CS0#...
  • Page 50 J28 – Full Mini PCI Express / mSATA Socket Pin # Signal Description Pin # Signal Description WAKE# +3.3VSB Reserved Reserved +1.5VS CLKREQ# Reserved Reserved REFCLK- Reserved REFCLK+ Reserved Reserved Reserved Reserved Reserved PERST# PERn0 +3.3VSB PERp0 +1.5VS SMB_CLK PETn0 SMB_DATA PETp0 USB_D-...
  • Page 51 J30 – Standard SATA / SATA DOM Interface Pin # Signal Description Ground Ground Ground / +5VS J31 – PS2 KB/MS Pin # Signal Description KBDATA MSDATA Ground +5VSB KBCLK MSCLK...
  • Page 52 J32 – Cap hotkey Connect Pin # Signal Description +5VSB +3.3VSB KP_SCL KP_SDA PWR_LED# KP_P_LED SATA_LED# J33 – Standard SATA Interface Pin # Signal Description Ground Ground Ground...
  • Page 53 J34–PCIE X4 Slot Interface Pin # Side B Side A Pin # Side B Side A +12VS RSVD RSVD RXN0 +12VS +12VS RSVD +12VS TXP1 RSVD TXN1 SMBCLK RSVD SMBDATA RSVD RSVD TXP2 +3.3VS_PCIE RSVD TXN2 RSVD +3.3VS_PCIE +3.3VSB +3.3VS_PCIE PCIE_WAKE# PLT_RST# TXP3...
  • Page 54 J37 – Internal COM4 TTL Serial Port Pin # Signal Description Pin # Signal Description TTL_DSR# TTL _DCD# TTL _RTS# TTL _SIN TTL _CTS# TTL _SOUT TTL _RI# TTL _DTR# +5VS/+12VS J38 – System FAN Pin # Signal Description +12VS J39 –...
  • Page 55 Pin # Signal Description Pin # Signal Description 232_DSR# 232_DCD# 232_RTS# 232_SIN 232_CTS# 232_SOUT 232_RI# 232_DTR# +5VS J40 – Internal COM4 Serial Port Pin # Signal Description Pin # Signal Description 232_DSR# 232_DCD# 232_RTS# 232_SIN 232_CTS# 232_SOUT 232_RI# 232_DTR# +5VS J41 –...
  • Page 56 J42 – Power / HDD LED Pin # Signal Description PWR_LED# +3.3VSB +3.3VSB SATA_LED# J43 – Internal MIC Connect Pin # Signal Description MIC_R MIC_L J44 – Internal COM6 Serial Port Pin # Signal Description Pin # Signal Description 232_DSR# 232_DCD# 232_RTS# 232_SIN...
  • Page 57 +5VS/+12VS J45 / J46 –External RJ45 Ethernet Port Activity/Link LED Status Description No Link Blinking Data Activity Link Speed LED Status Description 10 Mbps Green 100 Mbps Orange 1 Gbps J47,J48 – DisplayPort Interface Pin # Signal Description Pin # Signal Description ML_LANE0+ ML_LANE3-...
  • Page 58 ML_LANE2+ AUX_CH- HOT PLUG ML_LANE2- RETURN ML_LANE3+ +3.3VS J49 – Light Sensor Connect Pin # Signal Description +3.3V Ground SMBCLK LIG_SEN_INT# SMBDATA J50, J51 – RIGHT / LEFT CH for Speaker. Signal Description Pin # J50 (RIGHT CH) J51 (LEFT CH) ROUT+ LOUT+ ROUT-...
  • Page 59 Pin # Signal Description +3.3V_ALWAYS HEATER_LED# ERROR_LED# J55 – Internal COM2 Serial Port Pin # Signal Description Pin # Signal Description 232_DSR# 232_DCD# 232_RTS# 232_SIN 232_CTS# 232_SOUT 232_RI# 232_DTR# +5VS/+12VS J56 – Internal COM1 Serial Port Pin # Signal Description Pin # Signal Description 232_DSR#...
  • Page 60 J57 – USB2.0 Port Pin # Signal Description Pin # Signal Description +5VSB +5VSB Data1- Data2- Data1+ Data2+ J58 – Power Switch connect Pin # Signal Description Power ON J59 – USB3.0 Port Pin # Signal Description Pin # Signal Description Data1- Data2- Data1+...
  • Page 61 SSRX1- SSRX2- SSRX1+ SSRX2+ SSTX1- SSTX2- SSTX1+ SSTX2+ J60 – Reset Connector Pin # Signal Description SYS_RESET# J61 – Reset Button Pin # Signal Description SYS_RESET# J62 / J63 – External Audio Phone Jack...
  • Page 62 Audio Jack Signal Description Line Out (stereo) Green Microphone (stereo) Pink J64 – External COM1 Connector Signal Description Pin # RS-232 RS-422 RS-485 TX D- DATA- TX D+ DATA+ RX D+ RX D- J65 – External COM2 Connector Pin # Signal Description Pin # Signal Description...
  • Page 63 J66,J67– reading light Pin # Signal Description +12VSB READING LIGHT J68– Mechanical hotkey Pin # Signal Description PWRSW# Ground Sound up Sound down Ground Brightness up Brightness down +3.3VSB PWRLED#...

  • Page 64: Touch Lock Ap User's Manual

    This Touch Lock Tools Application Program (AP) and related documentation are available for whom has signed and returned a copy of the AP Licensing Agreement to Wincomm. Contact Wincomm account manager if you require a copy of the software. Touch Lock Tools AP Requirement...
  • Page 65 2.3.3 You can see the Touch Lock Tools form and min keyboard as below. 2.3.4 You can change touch lock timer (range 1-100 / 1-99 means 1-99 seconds / 100 means always lock). By set value in textbox and click “Set” button. If setting success, it will show message as follow.
  • Page 66 If setting timer value error, it will show error message as follow. 2.3.5 If touch lock is enable, you will see the timer in the lower right corner of the screen, and icon in task bar will become red . 2.3.6 If timer countdown to zero, touch will unlock automatically, and icon in task bar will become green.
  • Page 67 2.3.8 When you click “Minimize” button, the form will concealed below Task Bar. 2.3.9 When you click “Exit” button, program will disable WDT and close. 3. Getting Help If assistance is required when running the AP, please contact your account manager.

Table of Contents