Remington D6940GP Quick Start Manual page 4

Salon smooth hairdryer gift set
Table of Contents

Advertisement

During use, always ensure the inlet and outlet grilles are not blocked in any way as
this will cause the unit to automatically stop. If this should occur, switch off and allow
the unit to cool.
Keep the power plug and cord away from heated surfaces.
Do not leave the appliance unattended while plugged in.
Do not place the appliance on any soft furnishings.
Do not use attachments other than those we supply.
Do not set the appliance down while still on.
Do not twist or kink the cable, or wrap it round the appliance.
Do not use the appliance if it is damaged or malfunctions.
Check the cord regularly for any sign damage.
This appliance is not intended for commercial or salon use.
PARTS
1. Ceramic grille
2. Removable easy clean rear grille
3. Concentrator
4. Hang up loop
5. Diffuser
INSTRUCTIONS FOR USE
Wash and condition your hair as normal.
Squeeze out excess moisture with a towel and comb through.
Hairsprays contain flammable material – do not use while using this product.
Attach the accessory by fitting it to the front of the hairdryer and twisting clockwise
to lock it in place. Take care when you do this because the attachments can become
hot during use.
1. Plug the product into the mains power supply.
2. Switch your hairdryer on and select the desired speed setting (low F or high E)
using the speed selector switch.
3. Select the desired heat setting (low N, medium O or high P) using the heat selector
switch.
4. After use, turn the appliance off and unplug it.
5. Let the appliance cool down before cleaning or storing away.
4
Controls:
J Cool shot
N, O, P Heat selector switch
0, F , E Speed selector switch
Not shown:
Luxury storage bag
Round brush

Advertisement

Table of Contents
loading

Table of Contents