Advertisement
Quick Links
ET 2020
DUAL LASER INFRARED THERMOMETER
User Manual
THANK YOU FOR PURCHASING THIS PROFESSIONAL QUALITY
NON-CONTACT INFRARED THERMOMETER. THIS UNIT FEATURES
DUAL LASERS, WITH AN ABILITY TO MEASURE TEMPERATURES UP
TO 850°C. BASED ON THEIR EMISSIVITY CHARACTERISTICS.
SAFETY INSTRUCTIONS
DO NOT point directly into eyes or anything that can be reflect into eyes.
DO NOT point the laser directly at explosive gases.
PRODUCT DESCRIPTION
1. Dual laser targeting
2. LCD display
3. Function menu
4. Measuring trigger
5. Battery cover
LCD DISPLAY
1. Scanning and measuring procedure
2.Hold and keep last measurement data
3. Emissivity setting
4. °F and °C change
5. Main temperature display
6. Low voltage warning
7. Function transformation zone
CAUTION!
LASER RADIATION
DO NOT STARE INTO BEAM
DIODE LASER
1mW MAX OUTPUT at 635-670 nm
CLASS II LASER PRODUCT
2
3
1
4
5
Advertisement
Summary of Contents for ENDEAVOUR ET 2020
- Page 1 ET 2020 DUAL LASER INFRARED THERMOMETER User Manual THANK YOU FOR PURCHASING THIS PROFESSIONAL QUALITY NON-CONTACT INFRARED THERMOMETER. THIS UNIT FEATURES DUAL LASERS, WITH AN ABILITY TO MEASURE TEMPERATURES UP TO 850°C. BASED ON THEIR EMISSIVITY CHARACTERISTICS. SAFETY INSTRUCTIONS DO NOT point directly into eyes or anything that can be reflect into eyes.
- Page 2 OPERATING INSTRUCTIONS Temperature Measurement Point the instrument at the surface of the object you want to measure and press the trigger. The unit can display temperature, max temperature, min temperature, difference value, average value, max warning point, and min warning point. The result will stay on the screen for 7 seconds after the trigger is pressed.
- Page 3 IMPORTANT NOTES The object to be measured must be larger than the vision field of the instrument. Keep the object surface clean and free from frost, oil, dirt etc when measuring. If the object to be measured is reflective, cover it with adhesive tape or black paint before measuring. If the object to be measured is transparent (such as glass) the result may not be accurate.
- Page 4 The customer forwards the defective goods together with proof of purchase from Endeavour Tools or its authorized distributor at their expense, within 14 days of any request by Endeavour Tools to do so; d. The goods since the date of delivery to the customer have been properly maintained, stored and housed and the goods have not been abused or modified or the case opened;...
Need help?
Do you have a question about the ET 2020 and is the answer not in the manual?
Questions and answers