ENGLISH (Original instructions) SPECIFICATIONS Model: BU01 BU02 Capacities Air volume *1 0 - 2.6 m /min (0 - 92 cu.ft./min) Air speed (average) 0 - 62 m/s (0 - 139 MPH) *2 0 - 45 m/s (0 - 101 MPH) *3 Air speed (max.)
Page 3
If operating a power tool in a damp location is Disconnect the plug from the power source unavoidable, use a ground fault circuit inter- and/or remove the battery pack, if detachable, rupter (GFCI) protected supply. Use of a GFCI from the power tool before making any adjust- ments, changing accessories, or storing power reduces the risk of electric shock.
• Do not use nozzles other than the nozzles 10. Do not use to pick up flammable or combusti- provided by Makita. ble liquids, such as gasoline, or use in areas • Do not use the blower to inflate balls, where they may be present.
Page 5
If the machine is damaged, ask Under abusive conditions, liquid may be Makita Authorized Service Centers for repair. ejected from the battery; avoid contact. If con- tact accidentally occurs, flush with water. If 14.
Page 6
It will Avoid storing battery cartridge in a con- also void the Makita warranty for the Makita tool and tainer with other metal objects such as charger. nails, coins, etc.
Page 7
Installing or removing the nozzle wiper nozzle Optional accessory for BU02 Optional accessory for BU01 / BU02 Align the protrusions on the nozzle with the grooves on Attach the brush nozzle or wiper nozzle to the flexible the main unit, then insert the nozzle into the main unit, hose, and then install the flexible horse to the main unit.
Page 8
Installing or removing the long Installing or removing the dust bag nozzle Optional accessory for BU01 / BU02 Align the protrusions on the joint of dust bag with the Optional accessory for BU01 / BU02 grooves on the main unit, then insert the joint into the Install the long nozzle in the same way as the nozzle.
Battery protection system FUNCTIONAL DESCRIPTION The machine is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. CAUTION: The machine will automatically stop during operation if Always be sure that the machine is the machine and/or battery are placed under one of the switched off and the battery cartridge is removed following conditions:...
Speed adjusting dial area. For BU01 ► 1. Speed adjusting dial The speed can be changed by turning the speed adjust- ing dial to a given number setting from 1 to 3. Higher speed is obtained when the dial is turned in the direc- tion of number 3.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 11 ENGLISH...
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the man- ual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.