Table of Contents
Advertisement
34230-AVR75 Engelsk 03/03/1998 14:19 Side 7
A AC-3 Indicator: This indicator
illuminates when the AVR75 is
decoding a Dolby Digital input
source.
B Surround Mode Status: These
indicators display the currently
selected surround mode.
C Digital Mode Indicators: These
indicators show which digital input is
in use.
D Sleep Indicator: This indicator
lights when the AVR75 is in the
Sleep mode.
E Night Indicator: This indicator
lights when the AVR75 is in the Night
mode, which prevents the AVR75
from loud playback when digital
sources are in use.
F P-Scan: This indicator flashes
when the stations programmed
into the tuner memory are being
automatically reviewed.
Front Panel Information Display
7
G LFE Indicator: This indicator will
illuminate when the Low-Frequency
Effects (LFE) option has been turned
on through the controls in SETUP
MENU 3.
H DISP: This indicator lights when
the FL display has been turned
off using the Display button p to
remind you that the unit is still
turned on.
I ATT Indicator: This indicator
lights when the Attenuation function
has been engaged to cut the input
from analog sources by
approximately 50%.
J Main Information Display: This
ten-digit display shows messages
relating to the status, input source,
surround mode, tuner, volume level
or other aspects of unit's operation.
K Stereo: This indicator lights when
an FM station is broadcasting in
stereo.
L Tuned: This indicator lights when
an AM or FM station is properly
tuned and locked.
M Auto: This indicator signifies that
the Automatic Tuning mode is in use
for FM broadcasts.
N Memo: This indicator flashes
when the Memo button is pressed
when entering presets and other
information into the tuner's memory.
O Test: This indicator flashes when
the output levels are being set using
the built-in test signal generator.
P "Visual" Indicator: These
indicators display which input source
is being fed to the video monitor
output.
Q PCM Indicator: This indicator
illuminates to show that a standard
PCM (S/P-DIF) digital audio signal
is being decoded by the digital-to-
analog converter.
R Signal Level Indication: This is a
visual indication of the strength of a
radio station signal. The more bars
visible, the stronger the station.
Advertisement
Table of Contents
