Interflex Opendor IF-261 Manual

Cabinet lock

Advertisement

Quick Links

Opendor
IF-261 Cabinet Lock
OF-261-xxxx

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Opendor IF-261 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Interflex Opendor IF-261

  • Page 1 Opendor IF-261 Cabinet Lock OF-261-xxxx...
  • Page 2: Table Of Contents

    4 Maintenance, cleaning, and disinfection ..................5 Battery replacement ......................... 6 Technical specifications ........................7 Disposal ............................. 8 Declarations of Conformity......................8.1 EU Declaration of Conformity ..................... 19 8.2 UKCA Declaration of Conformity ....................19 © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 3: General Information

    The Cabinet Lock is the ideal solution for cost-effective, uncomplicated and wireless compliance with current security standards for a wide range of applications. The key feature of the Cabinet Lock from Interflex is that it can be easily integrated into the access control systems IF-6020 and IF-6040: card...
  • Page 4: Intended Use

    This document is solely intended for experts and people trained in electrical engineering. Only perform the actions described in this document if you belong to this target group. Interflex Datensysteme GmbH is not liable for any damages caused by improper installation or initial operation.
  • Page 5: Installation And Programming

    Batteries may pose a fire or burn hazard if handled incorrectly. Do not attempt to charge, open, heat or incinerate the batteries. Do not short circuit the batteries. 2 Installation and programming 2.1 Dimensions Dimensions of the reader unit © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 6 Installation and programming Dimensions of the lock © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 7: Installation Situation

    Door Spacer plates Variable spacer plate Installation of Cabinet Lock on wooden door Door frames Angle brackets Door Spacer plates Variable spacer plate Installation of Cabinet Lock on metal door 1 © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 8: Measurement And Calculation

    0.0 to 5.95 None 6.05 to 7.25 None 7.35 to 8.85 None 8.95 to 10.45 None 10.55 to 10.95 11.05 to 12.25 12.35 to 13.85 13.95 to 15.45 15.55 to 15.95 2 × 5 © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 9 10 to 16.0 None M4×16 16.1 to 19.0 1× M4×20 19.1 to 25.0 2× M4×25 25.1 to 30 3× M4×30 Get in touch with your Interflex contact, if you need additional parts © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 10: Installation

    2. Carefully press the light conductors down and remove the cover 3. Use needle-nose pliers to pull off the cable connector below the circuit board 4. Disassemble reading unit and lock © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 11 7. Slide out the positive guide until it touches the inside edge of the door 8. Press the positive guide further against the inside edge and tighten the screws until the positive guide can no longer be moved 9. If necessary, attach additional spacer plates © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 12 13. If necessary, attach the flange extensions to the lock 14. Hold the installation tool with one finger and place the lock on the spacer plate or through the D-hole socket 15. Run the connector cable through the socket © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 13 D-hole socket from the front 19. Tighten the tensioning element as far as it goes without turning the screw 20. Place the reader unit on the bayonet mount at an angle of approx. 45° © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 14 24. Attach the light conductor and press firmly in order to protect the reader unit from twisting 25. Route the cable neatly on the side 26. Insert the cover into the catch on top 27. Push the cover downwards to close it © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 15: Programming

    IF-6040 documentation. card The programming of the Opendor components is described in the Interflex offline components document. 3 Operation The following sections describe the operation of the IF-261 Cabinet Lock. The technical basics can be found in the separate document 1.
  • Page 16: Activating/Deactivating The Permanently Open Mode

    Do not use any aggressive cleaning agents or disinfectants for cleaning. If necessary, clean the surface with a soft, damp cloth. Only use disinfection agents that are specifically intended for disinfecting sensitive metallic surfaces and plastics. © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 17: Battery Replacement

    If you ignore the battery warnings, there is a chance that the Cabinet Lock may fail. In such case, the battery compartment is no longer accessible. To replace the batteries, you can connect it to an emergency power supply. © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 18: Technical Specifications

    Cabinets with a door thickness of up to 19 mm, for left and right hinged doors Signaling Audible: Buzzer Visual: Two-color LED General data Degree of protection IP40 Ambient temperature 4 °C to +40 °C Humidity Max. 95%, non-condensing © 2021 Interflex Datensysteme GmbH IF-261 Cabinet Lock...
  • Page 19: Disposal

    Old batteries for disposal to the supplier of the product. 8 Declarations of Conformity 8.1 EU Declaration of Conformity Interflex Datensysteme GmbH hereby declares that the products comply with the directives 2014/53/EU (RED) and 2011/65/EU (RoHS). The complete EU Declaration of Conformity can be found on our website in the Downloads / Videos section: www.interflex.de...
  • Page 20 Version 2). Upon request and for a charge no more than your cost of physically performing source distribution, Interflex offers to provide you with a medium customarily used for software interchange containing a complete machine-readable copy of the source code of the programs used. This offer is valid for a period of three years, starting on the date the product is purchased.

Table of Contents