Key Parts And Components - LG DLGX0002TM User's Manual & Installation Instructions

kEY PARTS AND COmPONENTS

In addition to the special features and
components outlined in the Special Features
section, there are several other important
components that are referenced in this manual.
FRONT-mOUNT LINT FILTER
1
Front-mounted lint filter allows for easy access
and cleaning after every load.
2
LEVELING FEET
Four leveling feet (two in the front, and two in
the back) adjust to improve dryer stability on
uneven floors.
PLC mODEm
3
The PLC modem should only be removed
by a technician or servicer, or when installing
the optional Remote Laundry Monitor
(purchased separately).
DRYING RACk
4
Use the drying rack with the RACK DRY cycle
option. The drying rack allows items, such as
sweaters, delicates, and gym shoes, to be placed
in a flat position for drying.
STAINLESS STEEL CLEANER AND CLOTH
5
A cleaner and cloth for stainless steel to clean a
dryer. For more user guide, refer to the following.
Stainless Steel Cleaner Directions
1. Shake well before using.
2. Apply a small amount of cleaner to paper towel or
sponge and rub surface to be cleaned.
3. Polish surface with clean, dry paper towel or cloth.
WARNING! EYE IRRITANT. HARMFUL IF
SWALLOWED.
Contains mineral oil and mineral spirits.
If in contact with eyes, wash with water for 15
minutes. If taken internally, do not induce vomiting;
call a physician. If in contact with skin, wash with
soap and water.
KEEP OUT OF REACH OF CHILDREN
Included Accessories
4
Drying Rack
PA RT S A N D F E AT U R E S
5
Stainless
Steel Cleaner
Power Cord Location
(Gas Models)
Gas
Connection
Location
(Gas Models)
Rear of Dryer
1
2
Terminal Block
Access Panel
(Electric Models)
3
Exhaust Duct
Outlet