Table of Contents PRODUCT OVERVIEW NTRODUCTION POWER CONNECTIONS 2.1.1 R232 P - AC OWER ONNECTIONS 2.1.2 R232-48VDC P - DC OWER ONNECTIONS MOUNTING TEST CABLE WIRING ONNECTION ULE OF HUMB SPECIFICATIONS R232 / R232-48VDC Installation Guide Page 2 of 8...
R232 will be used synonymously unless there is a need to differentiate the models. The R232 front panel features a row of LED indicators to indicate the presence of power and which input is routed to a respective output. During operation a corresponding LED will light either green or amber indicating which output it is routed too.
2.1.1 R232 Power Connections - AC The in the pocket power supply of the model R232 is an International Electrotechnical Commission (IEC) standard receptacle as shown in Figure 4 below. Figure 4: R232 Pocket Power Supply with IEC receptacle for AC input.
Pocket Power Supply opening Power cable management tray Figure 5: R232 side view with AC power cord installed and properly configured. 2.1.2 R232-48VDC Power Connections - DC The model R232-48VDC uses a different connector in the Pocket Power Supply opening. This connector is a two-pin removeable terminal block where one side remains mounted to the chassis as shown in Figure 6, while the mating connector can be easily removed to facilitate installation of the power cabling.
Pocket Power Supply opening Power cable management tray Figure 7: R232-48VDC side view with DC power cabling installed and properly configured. Once power connections are made the unit is ready for mounting. 3 Mounting The R232 is designed to be mounted in a standard Electronic Industries Alliance (EIA) 19”...
4 Test Cable Wiring Much like the internal circuitry, the R232’s input and output connectors are a precision component and must be treated as such. Therefore, it is critical that NO EXCESSIVE FORCE BE APPLIED TO THE INPUT/OUTPUT CONNECTORS.