Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gigabyte GA-IMB410M
Summary of Contents for Gigabyte GA-IMB410M
- Page 1 GA-IMB410M User's Manual Rev. 1001 For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.
- Page 2 The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.
-
Page 3: Table Of Contents
Table of Contents GA-IMB410M Motherboard Layout ..................4 Chapter 1 Hardware Installation ..................5 Installation Precautions ..................5 Product Specifications ..................6 Installing the CPU .................... 9 Installing the Memory ..................9 Installing an Expansion Card ................. 10 Back Panel Connectors .................. 10 Internal Connectors .................. -
Page 4: Ga-Imb410M Motherboard Layout
GA-IMB410M Motherboard Layout SMBUS ATX_2X4 KB_MS CPU_FAN COMD_PW COMD LGA1200 COME_PW COMF_PW COME COMF HDMI Nuvoton Super I/O USB30_ LCD_VCC LANA LPT_SEL Intel GbE LAN ® COMC_PW USB30_ COMB_PW LANB COMA_PW AUDIO COMC COMB PCIEX16 GPIO_PWSEL COMA MON_SW GA-IMB410M PCIEX1_2... -
Page 5: Chapter 1 Hardware Installation
Chapter 1 Hardware Installation Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, make sure the chassis is suitable for the motherboard. •... -
Page 6: 1-2 Product Specifications
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in Š non-ECC mode) Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules Š (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Onboard Integrated Graphics Processor-Intel HD Graphics support: Š... - Page 7 Chipset: Š 4 x USB 3.0 ports on the back panel 4 x USB 2.0/1.1 ports available through the internal USB headers Internal 1 x 24-pin ATX main power connector Š Connectors 1 x 8-pin ATX 12V power connector Š 4 x SATA 6Gb/s connectors Š...
- Page 8 Form Factor Micro ATX Form Factor; 24.4cm x 24.4cm Š * GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. Please visit GIGABYTE's website for Please visit the Support\Utility List page...
-
Page 9: Installing The Cpu
• Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) • Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage. -
Page 10: Installing An Expansion Card
The two DDR4 memory sockets are divided into two channels and each channel has one memory socket as following: Channel A: DDR4_A1 Channel B: DDR4_B1 Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode. Dual Channel mode cannot be enabled if only one memory module is installed. - Page 11 • To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE's website for details on configuring the audio software. - 11 -...
-
Page 12: Internal Connectors
Internal Connectors 7 22 8 12 ATX_2X4 LCD_VCC CPU_FAN F_AUDIO SYS_FAN SPKR SATA3 0/1/2/3 VOL_CTRL M2A_SB F_USB1/F_USB2 F_PANEL COMA/B/C/D/E/F LPT_GPIO COMA/B/C/D/E/F_PW GPIO_SET CLR_CMOS LPT_SEL GPIO_PWRSEL SMBUS MON_SW LVDS Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. •... - Page 13 1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed.
- Page 14 DEBUG DEBUG PORT PORT 5) SATA3 0/1/2/3 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA F_USB3 F 1.5Gb/s standard. Each SATA connector supports a single SATA device. Pin No. Definition SATA3 SATA3 To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup,"...
- Page 15 7) F_PANEL (Front Panel Header) Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. •...
- Page 16 8) LPT_GPIO (LPT/GPIO Header) Use this header to connect a LPT or GPIO device. Refer to the descriptions of the GPIO_SET, GPIO_ PWRSEL, and LPT_SEL jumpers for further configuration. LPT: Pin No. Definition Pin No. Definition Pin No. Definition STB- ACK- AFD- BUSY...
- Page 17 11) GPIO_PWRSEL (GPIO Power Selection Jumper) Move the jumper cap from the LPT_SEL jumper to this jumper to configure the LPT_GPIO header to support GPIO device and also to specify the GPIO voltage. 1-2 Close: Set GPIO voltage to +12V. 2-3 Close: Set GPIO voltage to 5V.
- Page 18 14) LCD_VCC (LVDS Drive Voltage Jumper) This jumper can be used to provide different screen voltage settings. 1-2 Close: Set to 3V. (Default) 2-3 Close: Set to 5V. 15) FPD (Flat Panel Display Header) The FPD is a high-speed interface connecting the output of a video controller in a laptop computer, computer monitor or LCD television set to the display panel.
- Page 19 17) SPKR (Speaker Header) This speaker header is connected to a L/R audio pins from the board to support the 3W (4ohm) stereo speaker on your AIO chassis. Pin No. Definition Speaker OUT R- Speaker OUT R+ Speaker OUT L- Speaker OUT L+ 18) VOL_CTRL (Speaker Control Header) The header connects to the volume control button of the monitor to control the volume.
- Page 20 20) COMA/COMB/COMC/COMD/COME/COMF (Serial Port Headers) Each COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer. Pin No. Definition Pin No. Definition 9 10 NDCD- NCTS- NDSR- NDTR-...
- Page 21 23) BAT (Battery) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. You may clear the CMOS values by removing the battery cable: 1.
-
Page 22: Chapter 2 Bios Setup
To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on. To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility. Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system. -
Page 23: The Main Menu
The Main Menu Setup Menus Help Function Keys Configuration Items Current Settings Function Keys <f><g> Move the selection bar to select a setup menu <h><i> Move the selection bar to select an configuration item on a menu <Enter> Execute command or enter a menu <... -
Page 24: System
System This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time. & Access Level Displays the current access level depending on the type of password protection used. (If no password is set, the default will display as Administrator.) The Administrator level allows you to make changes to all BIOS settings;... -
Page 25: Peripherals
Peripherals & Initial Display Output Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. Sets the onboard graphics as the first display. (Note) IGFX PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default) &... - Page 26 ` NCT6116D Super IO Configuration & Serial Port 1/2/3/4/5/6 Configuration (Onboard COMA/B/C/D/E/F Connector) Enables or disables the onboard serial port. & Parallel Port Configuration (Onboard LPT_GPIO Connector) Enables or disables the onboard parallel port. ` NCT6116D HW Monitor Displays system health status, including system temperature, fan speeds, and voltage values. ` USB Configuration & Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS.
- Page 27 ` SATA And RST Configuration & SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) & SATA Mode Selection Specifies the operating mode of the integrated SATA controllers. Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface AHCI (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug.
-
Page 28: Chipset
Chipset & VT-d (Note) Enables or disables Intel Virtualization Technology for Directed I/O. (Default: Enabled) ® & Internal Graphics Enables or disables the onboard graphics function. (Default: Auto) & LVDS Support Enables or disables support for LVDS output. (Default: Enabled) &... - Page 29 & PCH LAN Controller (LANB) Enables or disables the Intel GbE LAN function. (Default: Enabled) ® If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. & Wake on LAN Enable Enables or disables the wake on LAN function.
-
Page 30: Bios
System (Default) & Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the GIGABYTE Logo when the system starts up. (Default: Enabled) & Boot Option Priorities Specifies the overall boot order from the available devices. Removable storage devices that support GPT format will be prefixed with "UEFI:"... - Page 31 & VGA Support Allows you to select which type of operating system to boot. Enables legacy option ROM only. Auto EFI Driver Enables EFI option ROM. (Default) This item is configurable only when Fast Boot is set to Enabled or Ultra Fast. &...
- Page 32 & Administrator Password Allows you to configure an administrator password. Press <Enter> on this item, type the password, and then press <Enter>. You will be requested to confirm the password. Type the password again and press <Enter>. You must enter the administrator password (or user password) at system startup and when entering BIOS Setup.
-
Page 33: Power
Power & Platform Power Management Enables or disables the Active State Power Management function (ASPM). (Default: Disabled) & PEG ASPM Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is configurable only when Platform Power Management is set to Enabled. (Default: Disabled) &... -
Page 34: Save & Exit
Save & Exit & Save & Exit Setup Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. &... -
Page 35: Chapter 3 Appendix
You can click the Xpress Install button and "Xpress Install" will install all of the selected drivers. Or click the arrow icon to individually install the drivers you need. Please visit GIGABYTE's website for Please visit GIGABYTE's website for more software information. -
Page 36: Regulatory Notices
European Commission Delegated Directive (EU) 2015/863 Statement CEM 2014/30/EU; Diretiva RSP 2011/65/UE. A conformidade com estas GIGABYTE products have not intended to add and safe from hazardous diretivas é verificada utilizando as normas europeias harmonizadas. substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). -
Page 37: Contact Us
Contact Us GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com WEB address (English): https://www.gigabyte.com WEB address (Chinese): https://www.gigabyte.com/tw GIGABYTE eSupport • To submit a technical or non-technical (Sales/Marketing) question, please link to: https://esupport.gigabyte.com...