Page 1
Smart Baby Monitor and Camera USER MANUAL FCC ID: 2AQ7B-IPC163...
Page 2
2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. For more products please visit www.brookstone.com...
SPECIFICATIONS Model: BKWIFICAMB Resolution: 1920x1080 Alarm: Motion and sound detection Night Vision: up to 5m Frame rate: Up to 15 fps Sensor: 1/3 CMOS Viewing Angle: 100° Audio: Microphone & Speaker built-in Micro SD Card Storage: Up to 32GB Compression: H.264...
Page 5
FEATURES • Wi-Fi remote controlled through App • Night vision • Motion detection • Sound detection • Dimmable night light • Two-way audio • Live video • Video recording • Takes still photos • Detects temperature in room • Plays 3 different lullabies and white noise Items included in package: Camera, Magnetic Stand, Silicone Teddy Bear Stand, Adapter, USB Cable, Mounting Kit and User Manual.
REGISTRATION AND LOGIN 1. Run the “Brookstone Smart” app from your smart phone. 2. Register and login. * Screenshots may slightly differ from actual app.
ADD DEVICE Plug in the Camera and wait for red light to blink rapidly and you hear a chime. If it doesn’t, press reset button for 3-6 seconds with the included pin, then release and the wait for red light to blink rapidly.
Page 10
4. Press the “next step” button 5. Make sure phone is connected to the Wi-Fi network that the device will be connected to. Enter your password for the Wi-Fi network. 6. Follow the directions in the app and hold the QR code on the screen in front of the view of the camera.
Page 11
7. Connecting process will begin. Do not turn off Wi-Fi Camera or phone while connecting. Wait for connection process to complete. 8. Once device has been successfully added, name the device what you would like it to be called in the app.
PUSH NOTIFICATIONS You can turn on/off notifications for all devices connected to app by clicking on the “Me” button at the bottom right of the screen. 2. Then click on ”Settings” button. From there you can turn on/off all notifications. 3.
REMOVE A DEVICE From the home screen, click on the device you would like to remove. 2. Then click on the edit symbol on the top right of the screen. 3. From there you would then click the “Remove Device” button at the bottom of the screen.
Page 14
MAGNETIC STAND & SILICONE BEAR COVER Stand and Mount options The camera comes with two different stand choices. 1. You can place the camera in the soft silicone bear stand to have it appear as a toy so that your baby or child will enjoy what it looks like.
APP FUNCTIONS Live Video To view live video simply click on the device under “All devices” and select the camera you just added. Hit the full screen button in the top left corner to see your live footage at full screen on your phone. To hide the control panel, you can press the top right button.
Video Recording To record video press the “camera” button at the top of the control panel. To end recording, press the “camera” button again. The photo and video will be saved in the APP(iOS) or the photos and video section(Android). To view recordings, press “gallery”...
Taking a Photo To take a photo, press the “camera” button. To view your photos, press the “gallery” button. Infrared Night Vision Night vision mode can be set to Auto/Off/On. The change modes, press the “Night Mode” button. Auto is default, which means the infrared night vision is controlled by the camera automatically.
Two Way Audio To activate two way audio, press the “speak” button. When the button is orange, whatever you say into your phone will come out of the speaker on the camera. You can also hear at the same time any sounds from the live video on the camera.
Motion and Sound Detection The camera uses infrared sensors when someone/something appears within its detection area. It also detects sound so you can hear if your baby is crying. Push notifications will be sent to your phone once motion or sound is detected. To access controls of the detection alarm settings, press the camera setting button at the top right.
Theme Color The control panel can be set to “Light Mode” or “Dark Mode”. To change this, press “Theme Color” and a pop up menu will let you select light or dark mode.
Private Mode The camera has a private mode. When the private mode is turned on the camera goes to sleep. You can turn this mode on from the main screen by pressing “Private Mode”...
Anti-Flicker The camera has an “Anti-Flicker” setting if you notice flickering in your footage. Select it from the main screen and choose which frequency works best.
Night Light The camera has a night light feature that is dimmable. From the main camera screen, press “Light” and the options to control the night light will pop up. You can adjust the dimness from this screen or set a timer for it. When the camera is in the silicone bear cover the light is still visible.
Page 25
Lullaby’s and White Noise The camera can play 3 different lullaby songs along with the option of just playing white noise. To control this feature, on the main camera screen scroll to the bottom and press “Lullaby”. From there, you can control the volume, have the song set on repeat and pick which song you would like the camera to play.
Page 26
Viewing Temperature in Room The camera can tell you the temperature of the room it is in. To get to this feature, scroll to the bottom on the main camera screen and press “Temperature”. From there you can view the temperature and have the camera send an alert if the temperature gets to an undesired level.
Page 27
Hub controls (sound, video quality, zoom in/out) You can control features from the live video feed. There is a volume button that is used to mute and unmute the live feed. There is also a button for the video quality and it can be used to switch between standard and high definition resolution.
Page 28
Device”. On the next page press “Add Sharing” at the bottom. After that, enter the email on the person’s Brookstone Smart account that you would like to share the camera with. They will get a notification to accept and after that the other person will have access to view your camera through the Brookstone Smart app on their phone.