Emissivity; Automatic Power-Off - SATA 03081 User Manual

Emissivity

The emissivity within the step size of 0.01 may be adjusted between 0 and 0.99, and its default
value is set as 0.95. A correct emissivity is essential for accurate temperature measurement.
Emissivity has a significant impact on the measured surface temperature of the product. From
the primary menu of the Setup page, select the "Emissivity" option, and click "OK" to enter
the "Emissivity" submenu as shown above. Then click "OK" again, and adjust the emissivity
parameter with the left/right key. After adjustment, click "OK" to save the parameter. Finally, click
"BACK" to exit from the "Emissivity" submenu and return to the primary menu of the Setup
page.

Automatic power-off

From the primary menu of the Setup page, select the "Automatic Power-off" option, and
click "OK" to enter the "Automatic Power-off" submenu as shown above. Then select the time
parameter with the left/right key, and click "OK" to confirm the desired time parameter option.
Next, click "BACK" to exit from the "Automatic Power-off" submenu and return to the primary
menu of the Setup page.
03081
EN DE RU KO PT
Automatic power-off
5 minutes
10 minutes
30 minutes
Off
JA ES
- 30 -