Solvit Tagalong Jumbo Care/Use Manual

Thank you for purchasing the Solvit Tagalong™ On-Seat Booster. This product is designed to let pets up to
30 lbs ride comfortably in a vehicle thus reducing driver distraction and improving safety.
To assemble, un-bundle the plastic pieces and locate the Front Strut, Left Wall and Right Wall.
IMPORTANT: When assembling all plastic pieces, keep the smooth side of each piece facing "in" and the
side with circles facing "out". Insert tab A on Front Strut into slot A in Left Wall and slide Front Strut in the
direction of the arrow until tab A is in the fully locked position.
Repeat this procedure to lock tab B on Front Strut into slot B on Right Wall, and to lock tabs C and D on
Rear Strut into slots C and D on the Left and Right Wall sections.
Place the assembled plastic frame upside-down on a clean surface.
The Outer Fabric Shell has a zipper and small tags marked "Z"
(next to zipper) and "X" (on opposite seam). With zipper in the
fully open position, slide the fabric shell over the plastic frame so
the "Z" seam aligns with the "H" corner at the back of the plastic
frame and the "X" seam aligns with the "G" corner.
Tagalong™ Jumbo On-Seat Booster
Care & Use Guide
The Seat section is a three-panel piece that was
folded in a "Z" shape in the package. Before
connecting to the Left and Right Wall sections,
fold the Seat section into a "U" shape with the
smooth sides facing "in". Insert double-tab E on
the front panel of the Seat section into slot E on
the Left Wall and slide to lock. Repeat for tab G
then repeat for tabs F and H into the
corresponding slots on the Right Wall.
100616