Page 2
Your Wi‐Fi & Bluetooth speaker should be treated with care. The information below has been provided in the interest of safety and will help you to enjoy this product and the benefits it brings for many years. Read these instructions – All the safety and operating instructions should be read 1. before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5. WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding‐type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip‐over. ...
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Operate this product only from the type of power source indicated on the back panel. For products using an external power supply, use an exact replacement if lost or damaged. For products operating from battery power, refer to the user manual. 16. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the product. c. If the product has been exposed to water or rain. d. If the product does not operate normally by following the operating instructions. e. If the product has been dropped or damaged in any way. f. When the product exhibits a distinctive change in performance. 17. Keep this product a safe distance away from naked flame, such as a lit candle. 18. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 19. When replacement parts are required, be sure your service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20. Upon completion of any service, ask the service technician to perform safety checks to confirm the product is in proper operating condition. 21. The recommended operating temperature range is 5ºC to 40ºC (41ºF – 104ºF). 22. WARNING : The mains are not disconnected in the off position, but the circuits are de‐powered. 23. The power cord plug serves as the disconnect device and should remain readily accessible. 24. The maximum height above sea level is 2000m. 25. The maximum operating ambient is 45ºC. (may to select 35ºC or 40ºC.) FCC Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and (2) this device must accept any...
interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help. Only operate the device in accordance with the instructions supplied. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of Product. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
Page 5
Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.
Page 6
5G band 1: the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à...
Page 7
Important RF IC Instructions CE Declaration of Conformity Low Voltage Directive 2006/95/EC ...
Page 10
WiFi set up 1. Go to your mobile WiFi’s 2. download and launch S2 setting and select device S2S JS‐AVS mobile app ...
Page 11
5. key in your WiFi 3. under “Speaker” 4. press “Next” network and enter tab, add device by password, then clicking “+” on upper “Next” right corner ...
Page 12
6. connecting… 7. you can skip this 8. Done! Finish! step if you don’t want to set up profile AVS set up 2. Click “Amazon 1. Click “Get 3.
4. Click “Get 6. Sign in with your 6. Done! Finished! Started” AVS account APP features 1. Language selection 2. Time Zone 3. Wake Word Sound on/off 4. Speech Sound on/off 5. Do Not Disturb on/off ...
“Alexa, turn down the volume.” “Alexa, volume 6.” Bluetooth “Alexa, pair.” “Alexa, Bluetooth.” “Alexa, connect to my phone.” “Alexa, disconnect from my phone.” Help and Guidance We’re here to help you get the most from your S2S, Wi‐Fi/Bluetooth smart speaker with Amazon Alexa. If you still require further assistance, visit our official website on www.jazzhipster.com.tw Jazz Hipster Corporation 2F, No.512, Yuan‐San Rd., Chung‐Ho Dist. New Taipei City 235, Taiwan R.O.C. +886‐2‐22225678 ...