Table of Contents
Advertisement
Label Decoration
10
1
(Place remaining
label 1's on
opposite side of
front wheel)
2
Proper label application will help to keep the labels
looking their best!
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry cloth
to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying the label, rub the label firmly with a cloth to
make sure the label is adhered to your vehicle.
(Place label 5 on
opposite side)
13
(Place label 4
on opposite side)
3
(Place label 7 on
opposite side)
12
(Place label 11
on opposite side
of seat)
SIDE VIEW
9
DASH VIEW
Helpful Hint: The seat can be attached to the frame in any
of three positions, depending on the size of your child. Check
your child's fit on the trike by observing the seat to pedal
distance, as it is being ridden. If the pedals seem too far
away or too close for your child, move the seat up or down.
Seat
6
Seat
Retainer
8
Lower Position
• At an angle, insert the tabs on the seat into any of the top
three sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps
into the slots in the frame.
• Pull up on the seat to be sure it is secure.
6
Attaching the Seat
Tabs
Slots
Middle Position
Upper Position
Advertisement
Table of Contents
