Power Connections - LG DP889 User Manual

DP392-N_AUSALLK_ENG 6/2/08

Power connections

Connecting the Power Cable
Connect the supplied power cable from the unit to a power socket.
Attach the power plug to the body of the AC adapter.
(The actual set may differ from the drawing.)
Plug into the
"DC 12V IN"
jack.
Plug into
a power
source.
Power cord
release knob
AC adapter
• This AC adapter operates on 100-120V~ 1A 50/60Hz.
• Contact an electrical parts distributor for assistance in selecting a suitable
AC plug adapter or AC cord set.
• Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD
Connect the Automotive adapter
This unit and its automotive adapter are designed for use in vehicles that have
8.5-16 volt, negative ground electrical systems. This is standard for most vehi-
cles. If your vehicle has a different type of electrical system, the DC power sys-
tem cannot be used.
8
12:00 PM Page 8
Plug into the
"DC 12V IN" jack.
Plug into the car's
cigarette lighter
socket.
Automotive adapter
• This automotive adapter operates on DC 8.5-16V.
• Contact an electrical parts distributor for assistance in selecting a suitable
automotive adapter.
• Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD.
Caution
• To prevent electrical shock and possible damage to your unit or vehicle,
always unplug the automotive adapter from the cigarette lighter socket
before you remove the plug from your unit.
• A 3 amp. 250V fuse for protection is installed in the automotive adapter.
• While the engine is being started, disconnect the automotive adapter from
the car's cigarette lighter socket.
• Do not operate your unit when the car battery is discharged.
Peak current from the car generator may cause the DC fuse to blow.
• If the vehicle's supply voltage drops below approximately 10 volts, your unit
may not work properly.
• Do not leave your unit in a place where the temperature exceeds 70°C
(158°F), or the pick-up device may be damaged.
Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.