Tunstall iHealth BG5 Quick Start Manual

How does it work?

Note: Always keep the glucometer lancing device, test strips
and lancets in the carrycase.
Caution: You must wash your hands before using this device.
When prompted to measure your blood glucose level by
myMobile, please follow the steps below:

STEP 1

Remove the rotating end of the lancing device and insert the
flat end of a new lancet.

STEP 2

Gently twist the protective cover off the end of the lancet
and replace the end of the lancing device (it will click when
replaced properly). Then twist the opposite end of the
lancing device until it clicks.

STEP 3

Turn the device on by pressing and holding the on/M button
on the side of the device. Wait for the myMobile screen to
display the words 'Please insert test strip'. Then insert a test
strip smoothly and firmly into the iHealth Gluco+ device with
the arrows showing upwards.

STEP 4

The myMobile screen will now display the words: 'Strip
inserted. Waiting for blood sample.' Prick your finger with
the lancing device.
iHealth Wireless Smart
Gluco-Monitoring System (BG5)