Sena 50 Series Quick Start Manual

Sena WiFi Adapter for 50 Series
Indicators
USB
Connector
1

Sena 50 Utility App

• Download the Sena 50 Utility App to set up the WiFi
Adapter to automatically upgrade your main unit.
Android: Google Play Store > 'Sena 50 Utility'
iOS: App Store > 'Sena 50 Utility'
• Save time updating the firmware on the main unit with the
Sena 50 Utility App and enjoy your adventure even more!

Connection Setup

1. Open the Sena 50 Utility App.
2. Click the top left Menu button
Adapter" menu.
3. Follow the instructions on the Sena 50 Utility App to
connect the WiFi Adapter to a WiFi access point.
Note:
To change the WiFi access point, perform the Factory
Reset then repeat the steps above.
2

Upgrading the Firmware of the Main Unit

The firmware will be upgraded automatically while your main
unit is charging. If you want to manually upgrade the firmware,
change the setting on the Sena 50 Utility App.
Note:
Do not disconnect the WiFi Adapter while upgrading the
firmware. The product may be damaged.

LED Description

Charging Status
Firmware Upgrade Status
3
Charging Status
Disconnected
Charging (The main unit is powered off.)
Fully charged
Note:
Charging (The main unit is powered on.)
To upgrade the firmware, power off the main unit.
Firmware Upgrade Status
Disconnected or no firmware upgrade available
Upgrading firmware
Firmware upgrade completed
WiFi Status
Disconnected from an WiFi access point
Searching for WiFi access point
Connected to an access point
4

Powering On

Insert the USB Connector into a USB charger port that is
connected to a power source.
Note:
1. Any 3rd party USB charger (5 V/1 A) can be used with
WiFi Adapter if the charger is approved by either the
FCC, CE, IC or other locally approved.
2. Do not connect the WiFi Adapter to a USB port on
your PC.

Connecting to the Main Unit

Insert the USB-C Connector into the main unit's USB-C port.
Note:
If you leave the main unit on when connecting it, the
charging LED on the WiFi Adapter will blink red slowly.
5

Factory Reset

If you want to restore the WiFi Adapter to the factory default
settings, you can easily reset the unit:
1. Gently insert a paperclip into the pinhole on the back of
the unit and lightly press the Factory Reset Button.
2. The WiFi Adapter will automatically restart with the three
LEDs on.
Note:
The WiFi Adapter will be restored to factory default
settings which include the WiFi configuration setup, the
firmware setup and the language setup.
Quick Start Guide
Factory Reset Button
LED
Sena Technologies, Inc.
Customer Support: sena.com
USB-C
Connector
and select the "WiFi
WiFi Status
ENGLISH
2.0.0