Advertisement
STEP 1
Connect 2x foot pedal kit by 4-a M8 screwdriver. (Please note right
and left side).
STEP 2
Screw the base (3-a) on the kayak.(If already screwed, ignore this
step).
STEP 3
Connect pedal body and the base (3-a) through 3-b and 3-c by
hand.
STEP 4
To pivot the pedal drive system into/out of the water, rotate both
locker arms anti-clockwise first, then push the pedal drive system
away from you to pivot it up and out of the water.
7
Advertisement
