König Electronic VID-TRANS511KN Manual page 2

Introduction:
The 2.4 GHz frequency band is very busy due to applications like Bluetooth®, WiFi and
wireless networks. Therefore the signals of such equipment is easily distorted. That is why
the VID-TRANS510 uses the 5.8 GHz frequency, to avoid any interference between such
devices. Enjoy wireless video and audio in your house. Included: infrared extension for
control of connected equipment.
Description transmitter and receiver:
1.
2.
3.
Rear view transmitter:
1.
2.
3.
5.
4.
4.
2
1. Antenna for sending and receiving
remote control RF signal
2. Channel LED indicator for showing
the operational channel
3. Channel button for setting the
channel
4. Remote sensor for receiving the IR
signal of the remote control
5. Directional 5.8GHz antenna for
sending and receiving audio/video
signals
1. DC power input (9 VDC)
2. IR cable input
3. AV input (white: audio left, red: au-
dio right, yellow: video)
4. ON/OFF switch