Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Zivid Two
-
Page 2: Table Of Contents
9. About Zivid ........ -
Page 3: Regulatory Information
1. Regulatory Information 1.1 Compliance The Zivid Two camera is compliant with EN 62368, FCC class B, Canada ICES-003 (B) / NMB-003 (B), KC, CE, and CB environmental standards. This device complies with part 15 of the FCC Rules. Operation is subject to the follow-... -
Page 4: Safety Precautions
Transport the device in its original packaging or make sure it is properly cushioned during transportation. The Zivid Two camera use a white light source, which is tested against IEC62471 and is classified as Risk Group 2. IEC 62471 classifies optical radiation sources based on the level of hazard to the skin and eye. -
Page 5: Unboxing
2. Unboxing Zivid box content: Included in Development Kit: 1. Zivid Two 3D camera 5. Calibration Board ZVD2 ZVDA-CB01 2. 24 V power supply 6. Stationary ZVDA-PWR-xx ZVDA-MNT-ST10 3. 5 m power extension cable 7. Tripod Adaptor ZVDA-CBL-PWR-5M ZVDA-MNT-TP20 4. 5 m Ethernet (CAT-6) cable 8. -
Page 6: System Requirements
Radeon no longer supports SPIR on some GPUs, please verify your GPU drivers support SPIR to be compatible with Zivid Software. Zivid no longer supports AMD on Ubuntu 16.04 (AMD dropped support for Ubuntu 16.04 as of Radeon Software 18.50 for Linux). -
Page 7: Mechanical Installation
4. Mechanical Installation 4.1 Working Distance and Field-of-View Rev 1.0 - 9/2021 Zivid.com... -
Page 8: Mechanical Interface
4.2 Mechanical Interface The Zivid Two camera has three M5 mounting holes, one Ø5 positioning hole, and one Ø5x1 obround alignment hole. We recommend using DIN 912 / ISO 4762 Hexagon or ISO 14579 Hexalobular socket head cap screws in stainless steel (A2 or A4). To ensure not to damage the threads, we recommend not exceeding the specified maximum torque value when fastening the screws. -
Page 9: Available Mounts
4.3 Available Mounts Mounting accessories can be ordered at: shop.zivid.com Rev 1.0 - 9/2021 Zivid.com... -
Page 10: Flatness Of Mounting Surface
For optimal performance we recommend a mounting surface flatness of ±0,05 mm or better. Mounting the camera to an uneven surface can in some cases affect the calibration. We recommend using one of the Zivid Camera Mounts to ensure problem free instal- lation of the camera. Rev 1.0 - 9/2021... -
Page 11: Positioning Correctly
If possible, mount the camera at a slight tilt angle to avoid reflections and interference from the background. This also frees up space above the scene for easier access for tools and robots. Rev 1.0 - 9/2021 Zivid.com... -
Page 12: In Bin-Picking Applications
The projector rays should not fall on the inner surfaces of the two walls closest to the projector; they should almost be parallel to those two walls. Mounting the camera this way minimizes interreflections from the bin walls. -
Page 13: Connectivity And Power Supply
• Reset to factory IP address: Hold for 5 to 10 seconds until the Power LED turns green. • Revert to factory installed firmware: Hold for more than 10 seconds until the Power LED turns yellow. Rev 1.0 - 9/2021 Zivid.com... -
Page 14: Connecting To The Computer
We recommend to use the AC/DC adapter supplied with the unit to ensure compli- ance with emission and immunity standards. The Zivid unit is protected against reverse polarity and against overheating by a ther- mistor that physically removes the power. -
Page 15: Connection Via Switch
Thunderbolt 3. At a reduced performance you can also use 1000BASE-T and NBASE- T (1 Gbps, 2.5 Gbps, and 5 Gbps over copper) to USB adapters. Zivid Two has a factory default IP address: 172.28.60.5. To connect to the camera you must set up the network interface. -
Page 16: Windows
Windows Right click on your network connection and chose Properties. Ubuntu Set up the network configuration in the IPv4 tab. Rev 1.0 - 9/2021 Zivid.com... -
Page 17: Software
6. Software To download the latest software for your camera, navigate to: www.zivid.com/downloads Visit the Knowledge Base for the installation guide, and then navigate to the Zivid Studio user guide to learn how to capture your first point clouds: support.zivid.com Rev 1.0 - 9/2021... -
Page 18: Support And Troubleshooting
The Zivid Knowledge Base provides answers for commonly seen issues and ques- tions related to Zivid products, for both software and hardware. You will also find in depth articles about our camera technology, best use practices, different types of 3D imaging methods and structured light, to get a better understanding for how to use this product. -
Page 19: Service And Maintenance
The device contains no user-serviceable parts inside. The product warranty will be void if opened. Follow the below instructions to ensure that your Zivid camera is well maintained: • Check screw connections and connectors at regular intervals. • Do not block the air opening on the front and rear sides of the product. -
Page 20: About Zivid
Its Zivid One and Zivid Two products are regarded as the world's most accurate real-time 3D color cameras and bring human-like vision to the smart factories and warehouses of Industry 4.0. To find out more about Zivid, visit: www.zivid.com... - Page 21 ©23/08/2021, Zivid. All rights reserved. Subject to change without notice. Rev 1.0 - 9/2021 Zivid.com...