PRODUCT SAFETY modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. WARNING: Some dust created by power sanding, Unmodified plugs and matching outlets will reduce risk sawing, grinding, drilling and other construction of electric shock.
Page 6
moving parts. Loose clothes, jewellery or long hair can 5) BATTERY TOOL USE AND CARE a) Recharge only with the charger specified by the be caught in moving parts. g) If devices are provided for the connection of dust manufacturer. A charger that is suitable for one type extraction and collection facilities, ensure these of battery pack may create a risk of fire when used with are connected and properly used.
SAFETY WARNINGS FOR BATTERY PACK manufacture. Do not use any charger other than that specifically provided for use with the a) Do not dismantle, open or shred battery pack. equipment. A charger that is suitable for one type of b) Do not expose battery pack to heat or fire. Avoid battery pack may create a risk of fire when used with storage in direct sunlight.
Page 8
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste.
Soft grip handle Battery pack Belt clip Battery pack release button LED light Chuck sleeve TECHNICAL DATA Type WS2939U (CID18GW) (29 - designation of machinery, representative of impact driver) Voltage Max* No load speed 0-2400 /min Impact rate 0-3000 /min...
Page 10
OPERATION INSTRUCTIONS 3. TO REMOVE THE BATTERY PACK (SEE FIG. B1) Depress the battery pack release button firmly first and NOTE: Before using the tool, read the then slide the battery pack out from your tool. instruction book carefully. 4. TO INSTALL THE BATTERY PACK (SEE FIG. B2) INTENDED USE Slide the fully charged battery pack onto the tool with The tool is intended for driving in and loosening screws...
Page 11
Product Description: Battery charger or pocket, etc. Model Number: WS9924U Trade Name: WESCO 8. OVERLOAD PROTECTION When overloaded, the motor comes to a stop. Relieve This device complies with part 15 of the FCC Rules. the load on the machine immediately and allow cooling Operation is subject to the following two conditions: for approx.
Need help?
Do you have a question about the WS2939U and is the answer not in the manual?
Questions and answers