Table of Contents
Advertisement
Getting Started
3. Depending on the status of the PIN code request setting you
may or may not need to enter it.
Notice
Like any other radio device, avoid any unnecessary contact
with the antenna while your phone is on.
Turning Your Phone Off
1. Press
for a few seconds.
Access Codes
You can use the access codes described in this section to avoid
unauthorized use of your phone. The access codes can be
changed by using the Change Codes feature [Menu 4.5.3].
Security code (4 to 8 digits)
The security code protects the unauthorized use of your phone.
The default security code is set to '0000' and the security code is
required to delete all phone entries and to activate the Restore
Factory Settings menu. The security code default setting can be
modified from the Security Settings menu.
Notice
Always store your code in a safe place. If your code is lost,
please contact your service provider to reset.
Barring Password
The barring password is required when you use the Call Barring
function. The password is obtained from the service provider when
you subscribe to this function. See page 53 for further details.
22
General Functions
Making and Answering Calls
Making a Call
1. Make sure your phone is powered on.
2. Enter a phone number including the area code. To edit a
number on the display screen, press the right/left navigation
keys to erase one digit at a time.
]
Press and hold the right soft key[Clear] to erase the entire
number.
3. Press
to call the number.
4. When finished, press
.
Making a Call by Send Key
1. Press
, and the most recent incoming, outgoing and missed
phone numbers will be displayed.
2. Select the desired number by using the navigation key.
3. Press
.
Making International Calls
1. Press and hold the
key for the international prefix. The '+'
character can be replaced with the international access code.
2. Enter the country code, area code, and the phone number.
3. Press
.
Ending a Call
When you have finished a call, press the
key.
23
Advertisement
Table of Contents
