Advertisement
LENS TUBES
OVERVIEW
This document provides basic setup instructions and safety warnings for the following product(s):
ORD ER
C OD E
STR AN D PL T SERIES
64010-002
64010-102
64010-003
64010-103
64010-004
64010-104
64010-005
64010-105
64010-006
64010-106
64010-001
64010-101
64010-007
64010-107
64010-008
64010-108
CLEANING AND MAINTENANCE
1
Remove heavy particles with compressed air prior to cleaning with cloth and/or cleaning solution.
2
Use a clean, soft, lint-free cloth. Recommended to have one for wet cleaning and one for drying/polishing to prevent
streaking.
3
Always use a NON-AMMONIATED glass cleaner, isopropyl alcohol, or a mild soap and water solution.
4
Use caution to not continuously rub on lenses as damage may occur to coatings.
5
Polish with clean, dry cloth to prevent streaking.
6
Store lens tubes in plastic coverings to reduce dust/residue buildup.
DESCRIPT ION
PLT 10° lens tube black
PLT 10° lens tube white
PLT 14° lens tube black
PLT 14° lens tube white
PLT 19° lens tube black
PLT 19° lens tube white
PLT 26° lens tube black
PLT 26° lens tube white
PLT 36° lens tube black
PLT 36° lens tube white
PLT 5° lens tube black
PLT 5° lens tube white
PLT 50° lens tube black
PLT 50° lens tube white
PLT 70° lens tube black
PLT 70° lens tube white
ORDER
C ODE
ST RAND SP X ZOOM SERIES
SPX2550LT
25°-50° zoomspot lens tube black
SPX1535LT
15°-35° zoomspot lens tube black
ST RAND SP X FIXED S ERIES
SPX14LT
14° fi xed beam lens tube black
SPX19LT
19° fi xed beam lens tube black
SPX26LT
26° fi xed beam lens tube black
SPX36LT
36° fi xed beam lens tube black
SPX50LT
50° fi xed beam lens tube black
ST RAND LENS HOLDERS / ADAPT ER S
64010-012
PLT universal lens holder black
64010-112
PLT universal lens holder white
PLPF4ULTA
Universal tube adapter black
1
QUICK START GUIDE
DESC RIPT ION
Advertisement
Table of Contents
Summary of Contents for Strand STRAND PLT Series
- Page 1 QUICK START GUIDE LENS TUBES OVERVIEW This document provides basic setup instructions and safety warnings for the following product(s): ORD ER ORDER DESCRIPT ION DESC RIPT ION C OD E C ODE STR AN D PL T SERIES ST RAND SP X ZOOM SERIES 64010-002 PLT 10°...
- Page 2 QUICK START GUIDE LENS TUBES INSTALLATION PLT LEN TUBES To install or remove a PLT lens tube on the luminaire: Step 1. Click the adapter into the luminaire. Step 2. Insert the lens tube into the adapter. After acheiving the desired beam edge, tighten the locking bolt. Step 3.
- Page 3 QUICK START GUIDE LENS TUBES SPX LEN TUBES Fixed beam and zoom lens tubes are interchangeable. To remove or install an SPX lens tube on the luminaire: Step 1. Loosen (but do not remove) move lens knob(s) towards front of lens tube assembly. Lens Tube Lock Lens Tube Assembly Step 2.
- Page 4 QUICK START GUIDE LENS TUBES FOCUS To focus the lens tube: Step 1. Loosen the locking bolt located on one side of the adapter. Slide the lens tube forward or backward to achieve the desired beam edge. Step 2. Once the luminaire is focused, tighten the locking bolt. CUSTOMER SERVICE ©2021 Signify Holding.
Need help?
Do you have a question about the STRAND PLT Series and is the answer not in the manual?
Questions and answers