Advertisement

CYCLONE VACUUM CLEANER
INSTRUCTION MANUAL
Model:SL-008

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL-008 and is the answer not in the manual?

Questions and answers

Summary of Contents for Maxkon SL-008

  • Page 1 CYCLONE VACUUM CLEANER INSTRUCTION MANUAL Model:SL-008...
  • Page 2 CYCLONE BAGLESS VACUUM CLEANER SL-008 1), COMPONENTS LIST FOR SL-008 1, ON/OFF SWITCH PEDAL 2, HANDLE 3, CORD REWINDING PEDAL 4,POWER REGULATINGROLLING 5.FRONT COVER 6.HOSE SOCKET 7.COMBI NOZZLE 8.TUBES 9.HOSE 10.FLOOR BRUSH 11.REAR WHEEL 12.FILTER 13.DUST CONTAINER 14.DUST CONTAINER BUTTON 2)OPERATING MODE: 1.
  • Page 3 surfaces,-choose the right one. 4.Turn on the appliance: Hold the plug and pull out the cord, then insert the plug into the power socket. make sure that the power supply corresponds to the required power mentioned on the rating label. Press the on/off switch pedal to turn on the power.
  • Page 4 dust tank (d) the bottom cover will be opened and dust be released out automatically. (e),close the bottom cover and press it to lock the dust tank (f),put back the dust tank back to its place in unit. Close the front cover, press the place where mark the “Press”...
  • Page 5 NOTE: Do not exceed the red mark when pulling out the cord. The yellow mark shows the ideal cable length. WARNING: the plug must be removed from the power socket before any maintenance or replacement. SAFETY INSTRUCTIONS: 1.For the first operation, it is advisable to read the manual carefully before hand and keep it properly for further use.
  • Page 6 Technical Data Operating Voltage:220-240V-50/60Hz Power: Normal 2200W Max. 2800W...

Table of Contents