Troubleshooting - LG Beacon MN270 Owner's Manual

Troubleshooting

This section lists some problems that you might encounter while using
your phone. Some problems require that you call your service provider,
but most of problems you encounter are easy to correct yourself.
Symptom
No
connection to
the network
Codes do not
match
Function
cannot be set
Calls not
available
Phone cannot
be switched
on
88
Possible causes
Signal is weak or you're
outside of the carrier
network.
When you want to
change a security code
you have to confirm the
new code by entering it
again. The two codes
that you have entered
do not match.
Not supported by
Service Provider or
registration required.
Dialing error or service
limitations.
PWR/END key pressed
too briefly.
Battery is not charged.
Battery contacts are
dirty.
Possible Corrective measures
Move to a window or open space.
Check service provider coverage map.
Contact your Service Provider.
Contact your Service Provider.
Check the number dialed and check
the reception. Contact your service
provider.
Press the PWR/End key for at least
two seconds.
Charge battery. Check charging
indicator in the display.
Clean the battery contacts.