Advertisement
Quick Links
S user's manual
1. Technical Parameter
Model
Rated power(W)
Rated voltage(V)
Rated current （ A ）
Rotor diameter(m)
Start-up wind speed (m/s)
Rated wind speed(m/s)
Survival wind speed(m/s)
Working form
Rotating direction
piece)
Blade NO.(
Blade material
Tower height (m)
Supporting inverter type
Net weight(KG)
S300
300
400
12/24
12/24
25/12.5
33.3/16.7
1.5
1.5
2.5
2.5
9.6
9.6
35
35
PMG
PMG
Clockwise
Clockwise
3
3
Nylon
Nylon
6
6
Single-phase
Single-phase sine
sine wave
wave
20
20
S400
S600
600
24/48
25/12.5
1.7
2.5
10.5
35
PMG
Clockwise
3
Nylon
6
Single-phase sine
wave
25
S1000
1000
24/48
41/20
2.0
2.5
13
35
PMG
Clockwise
3
Nylon
6
Single-phase
sine wave
28
Advertisement
Related Manuals for Cablematic S300
Summary of Contents for Cablematic S300
- Page 1 S user's manual 1. Technical Parameter Model S300 S400 S600 S1000 Rated power(W) 1000 12/24 12/24 24/48 24/48 Rated voltage(V) 25/12.5 33.3/16.7 25/12.5 41/20 Rated current （ A ） Rotor diameter(m) 2.5 2.5 2.5 ...
- Page 2 Structure...
- Page 3 Description Description Nose cone Rotor Blades Slip ring Back cover Front cover Flange Generator case Tail vane Stator Back nose cone 3. Installation Connect the out going cables to the terminals at the bottom of the generator, and elicit the cable from outlet of the bottom of the tower.
- Page 4 A) Install the flange on the top of the tower and make 6 pieces M10*55 bolts fasten.
- Page 5 B) Install the blades on the hub and make 3 pieces M8*25 bolt fasten.
- Page 6 C) Put the hub onto the shaft and make M16 nut fasten, at the same time turn the blades clockwise till the hub connect the shaft tight.
- Page 8 D) Install the nose cone on the front of the hub and make one piece M6*40 bolt fasten.
- Page 9 E) Connect the cable from the generator to the controller (Before make sure battery and controller cable connected well.)
- Page 10 F) Flange drawing. Cautions 1. Thank you for purchasing the EW series wind turbine systems. Please read the manual carefully before installation; 2. The installation should be done by the experienced technical person. 3. Keep the electrical part (controller/inverter battery) away from...
- Page 11 corrosive gas and wet environment; 4. Controller should be connected with battery before it connected with wind turbine. 5. Do not open the generator and controller system doing the maintenance without notice or instructions; 6. Installation should be done under no wind weather.
Need help?
Do you have a question about the S300 and is the answer not in the manual?
Questions and answers