Advertisement
4.20
REMOVE ADJUSTING TOOLS.
Form a habit of checking to see that tools such as adjusting wrenches are
removed from the machine and properly stored before starting the engine.
4.21
STAY ALERT.
Watch what you are doing. Use common sense. Do not operate machine
when you are tired or fatigued.
4.22
DO NOT USE DRUGS, ALCOHOL, MEDICATION.
Do not operate machine while under the influence of drugs, alcohol,
or any medication.
4.23
KEEP THE RIGHT PARTS IN THE RIGHT POSITIONS.
Do not operate machine with parts missing or improperly mounted.
4.24
CHECK DAMAGED PARTS.
Verify all machine guards are in good condition and will function properly
before using the machine. Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any other conditions that
may affect machine operation. A guard, power switch or other part that is
damaged should be properly repaired or replaced by an authorized service
center unless indicated elsewhere in this instruction manual. Do not oper-
ate machine if lever or engine on/off switch does not function properly.
4.25
SECURELY MOUNT ACCESSORIES TO THE MACHINE.
Extra care must be taken an elevated location to prevent injury to some-
one on a lower level in the event the tool or accessory should drop. Do
not operate without fall protection for operator and debris protection for
public.
4.26
NEVER TOUCH THE MOVING PARTS.
Never touch moving parts such as blades, belts and others.
4.27
STOP OPERATION IMMEDIATELY IF ANY ABNORMALITY IS
DETECTED.
Stop using machine immediately if any abnormalities are observed during
operation. Examples of abnormalities include unusual noise and vibration.
4.28
WHEN REPLACING A PART, USE THE SAME TYPE
AND QUALITY.
When replacing a component part with a new one, use only the same
type and quality of new part. Never attempt to repair a machine if you are
unfamiliar with proper procedures and techniques required.
4.29
LOAD AND UNLOAD SAFELY.
Use proper heavy lifting procedures. Read & understand manuals before
loading & unloading.
4.30
SAVE THESE INSTRUCTIONS.
Refer to this operations and maintenance manual as well as any addition-
al instructions included from other manufacturers and organizations such
as Honda® and the Masonry and Concrete Saw Manufacturers Institute®.
Never permit anyone to operate the machine without proper instructions.
4.31
DO NOT SMOKE WHEN OPERATING EQUIPMENT.
Do not vacuum burning, smoking, or smoldering things like cigarettes,
matches, or hot ashes. Fire inside the dust pan may occur.
S A F E T Y I N S T R U C T I O N S
Surface Prep
Division
4.32
REFUEL WITH CARE.
Gasoline is extremely flammable. Gasoline vapor can explode. Refuel
outdoors, in a well ventilated area, with the engine in the OFF position.
Never smoke near gasoline and keep other flames and sparks away.
Always store gasoline in an approved container. If any gasoline is spilled,
make sure the area is dry before starting the engine.
4.33
STAY AWAY FROM FLAMMABLE ITEMS.
Do not use to vacuum flammable liquids, alcohol, gases, or explosive
dusts, like gasoline or other fuels, lighter fluid, varnish, polyurethane
coatings, cleaners, oil-based paints, natural gas, hydrogen, coal dust,
magnesium dust, grain dust, or gun powder. Motors create sparks which
may ignite the dust or fumes.
4.34
DO NOT HOLD HOSE DURING OPERATION.
Do not hold the hose against any body parts during operation. Static
electricity buildup in the hose during operation may result in static
shock.
4.35
MAINTAIN DUST EXTRACTOR WITH CARE.
Properly maintain dust extractor to keep hose unobstructed. Do not put
any object into openings. Do not use with any opening blocked; keep
free of dust, lint, hair, and anything that may reduce air flow. Any altera-
tion or modification is a misuse and may result in a dangerous condition.
DUST WARNING
Cutting, especially when DRY cutting, generates dust that comes
from the material being cut, which frequently contains silica.
Silica is a basic component of sand, quartz, brick clay, granite and
numerous other minerals and rocks. Exposure to excessive amount of
such dust can cause:
• Respiratory diseases (affecting your ability to breath), including
chronic bronchitis, silicosis and pulmonary fibrosis from exposure
to silica. These diseases may be fatal;
• Skin irritation and rash; and
• Cancer according to NTP* and IARC*
* National Toxicology Program, International Agency for Research
on Cancer
Take precautionary steps
• Avoid inhalation of and skin contact with dust, mist and fumes;
• Wet cut when feasible, to minimize dust;
• Wear and ensure that all bystanders wear appropriate respiratory
protection such as dust masks designed to filter out microscopic
particles. (See OSHA 29 CFR Part 1910.1200)
California Prop 65 Warning: Use of this product can cause exposure to
materials known to the State of California to cause cancer and/or birth
defects or other reproductive harm.
P: 877-817- 6687 F: 813-621-7125
Visit us at www.ussaws.com
sales@ussaws.com
5
Advertisement
