Related Manuals for LEDLight MSL-1W RGB
Summary of Contents for LEDLight MSL-1W RGB
- Page 1 LASER LIGHT MOVING LASER MSL-1W RGB User Manual Please keep the manual carefully for future reference...
- Page 2 Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For your own safety, please read this user manual carefully before installing the device. In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation and operation should be done by the verified technician and follow the instruction strictly.
-
Page 3: Description Of The Device
1. Description of the Device ● Total 1W RGB(200mW/638nm+150mW/520nm+650mW/445nm) laser light, good beam light, and can output small stand straight beam light. ● 20K Scanner. ● Low energy consumption, compact light weight, high brightness and farther of visible light beam. ●... -
Page 4: Safety Instructions
2. Safety Instructions CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching wires! This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. -
Page 5: General Guidelines
General Guidelines ►This device is a lighting effect for professional use on stages, in discotheques, theaters, etc., the device was designed for indoor use only. ►This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last page of this manual. - Page 6 ►The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety rope.Never stand directly below the device when mounting, removing or servicing the fixture. ►The operator has to make sure the safety relating and machine technical installations are approved by an expert before taking the device into operation for the first time.
- Page 7 XLR Mounting plug XLR Mounting socket DMX-512 connection with DMX terminator For installations where has it has too much lines or lights environment it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω...
- Page 8 6. Menu map and operation Display Function Dmx Address Address setting 1-512 Show Mode Mode select Auto/Sound/ILD/PRG/Slave Sound Sense Sound sensitivity 0-99 SD File SD Card files select SIZE Gobos size setting 10-100 Phasic set XY Reverse setting Speed set Speed setting 15-40 DMX STATE...
- Page 9 Tilt_Speed 0-255 From slow to fast Auto mode 0-49 50-99 Audio(Sound Active) mode Model Select 100-149 PRG mode 150-199 ILD mode 200-255 Manual mode PRG/ILD mode Manual mode Pattern/Folder Select 0-255 Pattern select,every 3 value one pattern File select 0-10 No strobe 11-199 Auto strobe...
- Page 10 11-87 Adjust size by manual 88-150 Zoom + 151-200 Zoom - 201-255 Zoom (+/-) circle No change 1-128 Manual rotation CH14 Rolling X 129-255 Auto rotation No change 1-128 Manual rotation CH15 Rolling Y 129-255 Auto rotation No change 1-128 Manual rotation CH16 Rolling Center...
-
Page 11: Cleaning And Maintenance
Cleaning and maintenance The operator has to make sure that safety-relating and machine-technical installations are inspected by an expert after every four years in the course of an acceptance test. The operator has to make sure that safety-relating and machine-technical installations are inspected by a skilled person once a year.