Table of Contents
Advertisement
Setting the microwave
Example: microwave power setting 600 W
Press the required microwave power setting.
1.
The selected microwave power setting lights up in the
display, and "1:00 min" appears.
Set a cooking time using the rotary selector.
2.
Press the "start" button.
3.
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving memory settings
Example: 360 W, 25 minutes
Press the
i
button.
1.
"M" appears in the display.
Press the required microwave power setting.
2.
"M", the selected power setting and "1:00 min" appear in the
display.
Set the cooking time using the rotary selector.
3.
Confirm by pressing the
4.
The clock reappears. The setting is saved.
Changing the signal duration
You will hear a signal when the appliance is switched off. You
can change the duration of the acoustic signal.
Press the "start" button for approx. 6 seconds.
The new signal duration is adopted.
The clock reappears.
i
button.
The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. Open the appliance door or press "stop". The
clock reappears.
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Pausing
Press the "stop" button once, or open the appliance door. After
closing the door, press the "start" button again.
Cancelling
Press the "stop" button twice, or open the door and press the
"stop" button once.
Note: You can also adjust the cooking time first and then the
microwave power setting.
Notes
You cannot save several microwave power settings one after
■
the other.
You cannot save automatic programmes.
■
You can save the memory settings and start the appliance
■
immediately. When finishing, instead of pressing
"start".
Saving a new setting in the memory: press the
■
The old settings appear. Save the new programme as
described in steps 1-4.
Starting the memory
It is very easy to start the saved programme. Place your meal
into the appliance. Close the appliance door.
Press the
i
button.
1.
The saved settings are displayed.
Press the "start" button.
2.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press "stop". The
clock reappears.
Pausing
Press the "stop" button once, or open the appliance door. After
closing the door, press the "start" button again.
Cancelling
Press the "stop" button twice, or open the door and press the
"stop" button once.
The following are possible:
Short signal duration - 3 tones
Long signal duration - 30 tones.
, press
i
button.
i
9
Advertisement
Table of Contents
