Each Wireless SBD package includes: and ‘C’ for optional Start ET sensor. The wireless optimizer code is also listed on the identity 3 - 5842AW/AZ T-Link3.0 IDs ‘A’, ‘B’ label. The optimizer code identifies wireless 1 - 4520USPD USB Wireless...
RaceAmerica 5842 Wireless SBD Timer TYPICAL SBD TRACK SETUP Figure 1 - T-Link 3.0 Wireless SBD Layout each T3 will flash red during transmit and flash USING PC SOFTWARE green each time signal is received from another T-Link 3.0. Locate the 4520USPD and connect the USB The wireless SBD Timer requires a PC with cable and plug the other end into a USB PC port.
RaceAmerica 5842 Wireless SBD Timer Align Status Optimizer Code Solid RED - Not aligned e.g. C305 Power Blink RED/GREEN - Power ON RF Receive Status Blink GREEN - Receive Blink RED - Transmit ID Code e.g. ‘C’ Figure 2 - T-Link 3.0 power and external connections...
<id> is the ID code of the T-Link 3.0 - A thru G are valid Further to minimize race program interruptions, RaceAmerica recommends some spare parts. A <timestamp> is a 9-digit number for timing use spare emitter/sensor pair should be available in the <error code>...