PolyJohn MS02-1000 Assembly Instructions

®
P J
OLY OHN ®
SEE PAGE 4 FOR PRODUCT WARNINGS
POLYJOHN
POLYJOHN
USA
WORLDWIDE
PolyJohn Enterprises Corp
PolyJohn (UK) Ltd.
2500 Gaspar Ave.
Equinox 1 Audby Lane
Whiting, IN 46394
Wetherby, England LS22 7RD
Phone: 800-292-1305
Phone: 44 (0) 1937-583333
Fax: 219-659-0625
Fax: 44 (0) 1937-583322
www.polyjohn.com
sales@polyjohn.co.uk
info@polyjohn.com
MS02-1000 Lifting Sling
July 2008
Page 1 of 4
MS02-1000
Lifting Sling
Assembly Instructions
General Overview
The MS02-1000 Lifting Sling, made
of a no rust galvanized steel. De-
signed to move most portable rest-
rooms around a construction site.
Shipped with the MS01-0200 - Small
Parts Bag which includes the neces-
sary parts for easy assembly.
Specifi cations
Clearance Height
when attached
to Unit 104 in 264 cm
Legs Can Extend
to length of the
Unit 48 in 122 cm
Width of Lifting
Arm 47.75 in 121 cm
Lifting Capacity 1000 lbs 453.59 kg
POLYJOHN
CANADA
PolyJohn Canada
P.O. Box 2300
199 Forest Plain Rd.
Orillia, Ontario LV3 6S2
Phone: 800-465-9590
Fax: 705-325-8250
info@polyjohncanada.ca
Attaching the Lifting Sling using the Steel Clips
Step 1. Attach one end of the MS01-0002G - Lifting Arm to the looped-end of
one of the MS01-0001G - Sling Legs. Repeat for the other end of arm and leg.
Step 2. Push the Portable Unit between the sling legs.
Step 3. Lift or tilt one end of the restroom and slide one of the metal clips
(MS02-0001G) over the end of the runner of the fl oor skid. Line up the hole of
the clip with the groove in the bottom of the runner. (Make sure the tall end of
the clip is on the outside of the skid, with the holes of the clip on the bottom along
the fl oor.)
Step 4. Insert one foot of a sling leg into the outer hole of the metal clip and
through the inner hole of the clip. Place a PC-000129 washer over the foot of
the sling leg. Follow by inserting a PC-000132 hairpin cotter into the hole of
the foot and push until the foot is in the middle opening of the hairpin cotter
to lock in place.
Step 5. Repeat for the three other ends of the skid.
Follow steps in reverse order to detach lifting sling.
MS02-1000 Lifting Sling
Page 2 of 4
July 2008