Safety Precautions; Never Do This; Always Do This - LG LM-2063H3L Owner's Manual

Safety
Precautions
To prevent injury and property damage, follow these instructions.
Incorrect operation due to ignoring instructions will cause harm or damage, the seriousness of which is
indicated by the following symbols.
WARNING
CAUTION
The following items are classified by these symblos.
Plug in the power plug
properly.
• Otherwise, it will cause electric
shock or fire due to heat
generation or electric shock.
Do not modify power cord
length or share the outlet
with other appliances.
• It will cause electric shock or fire
due to heat generation.
Always perform grounding
work.
• No grounding may cause electric
shock (See Installation Manual).
Unplug the unit if strange
sounds, smell, or smoke
comes from it.
• It may cause fire and electric
shock accident.
Keep firearms away.
• It may cause fire.
Precautions
This symbol shows the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.

Never Do This

Always Do This

WARNING
WARNING
Do not operate or stop the
unit by inserting or pulling
out the power plug.
• It will cause electric shock or fire
due to heat generation.
Do not operate with wet
hands or in damp
environment.
• It may cause electric shock.
Do not allow water to run
into electric parts.
• It may cause failure of machine
or electric shock.
Do not use the socket if it is
loose or damaged.
• It may cause fire and electric
shock.
Do not use the power cord close to
the heating tools.
• It may cause fire and electric
shock.
3
Do not damage or use an
unspecified power cord.
• It will cause electric shock or fire.
• In the supply cord is damaged, it mut be
replaced by the manufacturer or its
service agent or a similarly quallfied
person in order to avoid a hazard.
Do not direct airflow at
room occupants only.
• This could damage your health.
Always install air leakage
breaker and a dedicated
switching board.
• No installation may cause fire
and electric shock accident.
Do not open the entrance
during operation.
• It may cause electric shock.
Do not use the power cord near
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.
• It may cause an explosion or fire.